

© Copyright 1995 thru 2008 - The Mustang Works™. All Rights Reserved.
MustangWorks.com is designed and hosted by Aero3 Media.
MustangWorks.com is designed and hosted by Aero3 Media.
![]() |
#2 |
I'd rather be basketweaving
Join Date: Feb 2000
Location: Indianapolis
Posts: 2,551
|
![]() After reading an old article in a 5.0 mag I'm seriously considering a set of GT40 irons (not P's)
they had a 302 with an unported cobra intake and B cam (which i have, just not installed yet) and the GT40's made almost as much power as 11 other heads tested, including AFR's, trickflows..... so i'm thinking about getting some and porting the crap out of them. you can find them cheap on ebay or classifieds or swapmeets there really arent too many heads that will be under 1000, iron windsor jr's would be a good pick too, so would trick flows but i've heard that the places that sell the trickflows for the cheapest put in cheap valves and springs i'd get a set of bare ones and some good valves and springs and install them yourself, probably still cheaper this way sorry i wrote so much, hope it helps
__________________
NMRA O/C 9516 NA pumpgas stickshift 347 10.65@125.6, 6.73@100, 1.41 60ft |
![]() |
![]() |
|
|
![]() |
||||
Thread | Thread Starter | Forum | Replies | Last Post |
Help I need heads!! | SmokinStangGT | Windsor Power | 18 | 05-04-2003 10:05 PM |
New FRP Heads for 96 - 98 4.6 | surfbeast | Modular Madness | 9 | 11-21-2002 07:02 PM |
will 99-2002 cams out of the pi heads fit in the 96-98 stock heads | slow98 | Modular Madness | 6 | 10-25-2002 04:28 PM |
GT-40 heads | 5.0 Pony | Windsor Power | 1 | 09-10-2002 10:26 PM |
Which heads are beter? | patman | Classic Mustangs | 3 | 12-02-1999 03:42 AM |