How do these times look?

[TEXSN95]

Ok here is my best run on 25 psi potenza radials:
rt: .929..haha that sux
60ft: 2.22
1/8: 8.97 @ 80
1/4: 13.74 @ 103.4

Here is what I have: 95 Cobra, stock cobra intake, frpp 65 tb, postless stock MAF, K&N, pullies, 1.7s, 58cc gt40x with mild exhaust porting and valve job, crane 2031, 24s, 190 lph, mac shorties, 2.5 off road, 2.5 ultra flos w/ dumps, msd tfi coil, stock 308s, GW LCAs, Tokico 5ways, C springs, Steeda CC plates

I have a new stock fpr..due to time constraints i didnt have time to get an adjustable one after i messed the old one up. I know its still running rich, so here's what I'm going to do next. Make a homeade cold air so I can mount my MSD6A where the airbox was, up the plug gap to .06 from .054 and bump my timing from 14 to 16, then go back to the track. I'll get an adjustable fpr in the near future. The exhaust still smells really raw, and in the mornings when it's cold i hear a "popping" sound when i start to drive out of the driveway for the first time....like all of the cylinders arent firing b/c its cold. So im hoping the ignition will help that. My gas mileage is about 12-13, and the o2 sensors are about 6 months old. I know my car has more in it right now with my current combo. I know everyone is going to say "GEARS!!" but my goal is to run 12s with my 308s. I also set my tokicos to full soft to help with the launch but I dont think it helped much. My previous best before the heads/cam was a 14.18 @ 100.4. Any comments/suggestions/criticisms welcome.



------------------
Clint L.
White 95 Cobra #3637
R lookalike with lots of goodies