Buying an 8.8" rear

84_GT350 · 06-18-2001, 02:34 PM

But again, this has to be a STREETABLE rear end. I can't use a spool on the street and, while I could probably use C-clip eliminators for a little while, they'd eventually leak. Here's what the guy from Currie told me. Does this sound like a good deal? :

I assume you are looking for a housing with the later model 78-93 brackets mounted on it? For one of our housings complete with the 8.8 center, all of the mustang brackets installed, 3" tubes, and 9" housing ends would run 499.95. Add 159.95 for the LPW aluminum cover with the carrier cap stabilizers. 600 h.p. is going to be pushing the outer limits of what an 8.8 can handle though. I carry all the rest of the parts to do a complete build up on this rear also.

------------------
1984 1/2 GT350 (#842 Hatchback w/ T-tops), 302HO, Comp cams Xtreme Energy cam, Carter 625cfm carb, Weiand Stealth intake, MSD distributor, MSD coil, FMS 9mm wires, 1 5/8" MAC unequal shorties, 2 1/2" MAC Prochamber H-pipe, Flowmaster 2 chambers, KYBs, 16"x8" 4 lug Cobra Rs, Falken 245/45ZR16s

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
new rear end	fordkid68	Classic Mustangs	18	11-24-2009 08:05 PM
want rear disk without changing overall length of rear....please help!!!	dragstang86	Windsor Power	1	07-31-2003 06:32 PM
installing cobra rear in my LX...picked up a totaled 93 limited edition	dragstang86	Windsor Power	1	05-26-2003 11:23 AM
Rear Brake Line Removal	Kisner	Classic Mustangs	2	03-13-2002 12:31 PM
Recall 01S15 Rear Knuckle replacement	folthoff	Special Production	0	05-02-2001 08:28 AM

06-18-2001, 02:34 PM	#5
84_GT350 Registered Member Join Date: Apr 1999 Location: Overland Park, KS, USA Posts: 1,631	But again, this has to be a STREETABLE rear end. I can't use a spool on the street and, while I could probably use C-clip eliminators for a little while, they'd eventually leak. Here's what the guy from Currie told me. Does this sound like a good deal? : I assume you are looking for a housing with the later model 78-93 brackets mounted on it? For one of our housings complete with the 8.8 center, all of the mustang brackets installed, 3" tubes, and 9" housing ends would run 499.95. Add 159.95 for the LPW aluminum cover with the carrier cap stabilizers. 600 h.p. is going to be pushing the outer limits of what an 8.8 can handle though. I carry all the rest of the parts to do a complete build up on this rear also. ------------------ 1984 1/2 GT350 (#842 Hatchback w/ T-tops), 302HO, Comp cams Xtreme Energy cam, Carter 625cfm carb, Weiand Stealth intake, MSD distributor, MSD coil, FMS 9mm wires, 1 5/8" MAC unequal shorties, 2 1/2" MAC Prochamber H-pipe, Flowmaster 2 chambers, KYBs, 16"x8" 4 lug Cobra Rs, Falken 245/45ZR16s