Threaded Mode
© Copyright 1995 thru 2008 - The Mustang Works™. All Rights Reserved.
MustangWorks.com is designed and hosted by Aero3 Media.
MustangWorks.com is designed and hosted by Aero3 Media.
01-28-2003, 07:26 PM
|
#1 |
|
Registered Member
Join Date: May 2001
Location: Yuma, AZ
Posts: 536
|
Question about cam and supercharger
My question is will a compucam 2030 grind cam work well with an A-trim supercharger on a low compression (8.5 or 9 to 1) 306?
The specs of the cam are as follows: * Advertised duration: 270 intake/278 exhaust * Duration at .050 in.: 216 intake/220 exhaust * Gross valve lift: .533 in. intake/.544 in. exhaust * Lobe separation: 112 degrees * RPM range: 2,000 to 5,500 TIA, Dave |
|
|
|
|