What do I nee to convert a Notchback 302 to a 460

429mustang · 07-20-2001, 05:02 PM

I havn't seen any bellhousings for a T-5 to bolt up to a 460, but even if you found one the T-5 would get trashed pretty quick. T-5's can handle aroun 330 lbs/ft of torque, a stock 1970 460 puts out around 360 hp-480 lbs/ft torque. If you still want a manual, check out 4 speed toploaders. I looked into them a while ago, they can handle a lot more than a T-5, but they don't have an overdrive gear (although neither does a C-6), so if you don't care about overdrive, I'd go with one of those or the C-6 auto. I heard it's a little more complicated to fit up the Toploader as far as the headers clearing the clutch linkage, etc but it can be done. The toploaders go for around $900-1000 w/out the bell housing. Check out www.4speedtoploaders.com , they have toploaders + parts for swapping them into mustangs w/bigblocks.

------------------
86 Mustang GT w/pretty stock 93 5.0 (cam,pulleys,injectors, throttlebody,h-pipe)
Motor to be swapped for a 1970 429 +.030, ported heads, solid roller cam, victor intake, 10.2:1 comp, C-6 trans, 3:73 rearend W/moser axles

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Redo Block & Convert to EFI? Prices?	wildneg	Windsor Power	3	04-25-2002 12:00 AM
Found a Notchback, but need advice	2FastLX	Windsor Power	7	11-06-2001 02:21 PM
Ran a 93 cobra and a notchback	FivepointOH	Stang Stories	10	08-14-2001 12:52 AM
'89 convert. top frame	Muddstangin	Blue Oval Lounge	1	08-11-2001 10:56 PM
will sn95 convert rear seats fit in a sn93 convert???	LX XLR8R	Windsor Power	4	06-05-2001 10:22 PM

07-20-2001, 05:02 PM	#10
429mustang Registered Member Join Date: May 2001 Location: westerville, OH USA Posts: 618	I havn't seen any bellhousings for a T-5 to bolt up to a 460, but even if you found one the T-5 would get trashed pretty quick. T-5's can handle aroun 330 lbs/ft of torque, a stock 1970 460 puts out around 360 hp-480 lbs/ft torque. If you still want a manual, check out 4 speed toploaders. I looked into them a while ago, they can handle a lot more than a T-5, but they don't have an overdrive gear (although neither does a C-6), so if you don't care about overdrive, I'd go with one of those or the C-6 auto. I heard it's a little more complicated to fit up the Toploader as far as the headers clearing the clutch linkage, etc but it can be done. The toploaders go for around $900-1000 w/out the bell housing. Check out www.4speedtoploaders.com , they have toploaders + parts for swapping them into mustangs w/bigblocks. ------------------ 86 Mustang GT w/pretty stock 93 5.0 (cam,pulleys,injectors, throttlebody,h-pipe) Motor to be swapped for a 1970 429 +.030, ported heads, solid roller cam, victor intake, 10.2:1 comp, C-6 trans, 3:73 rearend W/moser axles