Anyone with a 94-95 stang gt that has done this?

VibrantRedGT · 07-20-2001, 08:16 PM

You can't just take an older style computer and plug it in. It won't work.

There is a whole kit that Pro-M sells for $800. You get the computer, wiring harness, MAP sensor, BAP sensor, instructions and hardware.

Another option which was mentioned is a custom burned chip. You see our computers are actually better written than the older cars. In fact to well. So use the existing computer and rewrite it with a chip. Do not do a mail order chip. That won't help at all.

------------------
1994GT-Vibrant Red, FRPP GT-40X Heads, Scorpion 1.7 Roller Rockers, Crower 15511 Cam, Edelbrock Intakes, BBK 65MM Throttle Body, Pro-M 77MM Mass Air, FRPP 24# Injectors, Kirban Fuel Pressure Reg., MAC 1 5/8 Equal length headers, Bassani off road X, MAC Cat Back, March Pulleys, FRPP 3:55 gears, FRPP Aluminum Driveshaft, FRPP King Cobra Clutch, Steeda Upper/Lower Control Arms, G-Trac Bar, Strut Tower Brace, Steeda Sub Frames, FRPP 5300-C Srings, Auto Meter Fuel Pressure/Water Temp Guages and alot

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
'02 GT Drop top Vs. '94 Cobra	EZRIDN	Stang Stories	3	03-26-2004 04:23 PM
'87-'93 GT and GT Cobra	Trefty	Windsor Power	12	12-04-2003 05:08 PM
Part out my GT or fix it???	tireburner163	Blue Oval Lounge	18	06-19-2003 12:46 PM
The '79 Stang gets a younger sibling (I bought the 92 GT)	Fox Body	Blue Oval Lounge	8	03-19-2003 09:50 PM

07-20-2001, 08:16 PM	#3
VibrantRedGT Registered Member Join Date: Jun 2000 Location: Boca Raton, FL Posts: 17	You can't just take an older style computer and plug it in. It won't work. There is a whole kit that Pro-M sells for $800. You get the computer, wiring harness, MAP sensor, BAP sensor, instructions and hardware. Another option which was mentioned is a custom burned chip. You see our computers are actually better written than the older cars. In fact to well. So use the existing computer and rewrite it with a chip. Do not do a mail order chip. That won't help at all. ------------------ 1994GT-Vibrant Red, FRPP GT-40X Heads, Scorpion 1.7 Roller Rockers, Crower 15511 Cam, Edelbrock Intakes, BBK 65MM Throttle Body, Pro-M 77MM Mass Air, FRPP 24# Injectors, Kirban Fuel Pressure Reg., MAC 1 5/8 Equal length headers, Bassani off road X, MAC Cat Back, March Pulleys, FRPP 3:55 gears, FRPP Aluminum Driveshaft, FRPP King Cobra Clutch, Steeda Upper/Lower Control Arms, G-Trac Bar, Strut Tower Brace, Steeda Sub Frames, FRPP 5300-C Srings, Auto Meter Fuel Pressure/Water Temp Guages and alot