Threaded Mode
© Copyright 1995 thru 2008 - The Mustang Works™. All Rights Reserved.
MustangWorks.com is designed and hosted by Aero3 Media.
MustangWorks.com is designed and hosted by Aero3 Media.
05-10-2003, 08:14 AM
|
#2 |
|
Registered Member
Join Date: Feb 2002
Location: Maryville,TN
Posts: 415
|
You have 19# injectors and the MAF's are calibrated for them. The 70 mm T/B should be fine. You will most likely have to ditch the chrome air intake due to the MAF'S not working well with them. You can buy the ported Plenum for $225 or so or do it yourself. Remove the plenum and look inside. you will be amazed how rough it is inside. use a die grinder with a heavy grit"flapper" sanding wheel on it. Snad down as much as is safe. use a set of calipers to measure wall thickness as you go. finnish up with a fine sanding wheel and your done. You can also polish the outside as I did. Check my post on polishing plenum and T/B. Next up you may go with a better ignition system!
P.S. - with all the bolt on you will still only be hanging tough with the Z's the V-6"s you have no problem with. I found out, GET BLOWN or get BLOWN AWAY!
__________________
98 GT / convertable -98 Saleen engine, Saleen appearance pkg. SHM cams,P&P NPI heads, and so much more! |
|
|
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| What mods next? | SteveAZ | Windsor Power | 0 | 05-20-2003 09:00 PM |
| Brake mods ( and other first mods) for a 98 Vert | Chevyguy | Modular Madness | 11 | 09-19-2002 10:03 AM |
| Future Mods | Strider | Modular Madness | 6 | 12-19-2001 01:39 AM |
| Making a fast Street Car = More mods? | MrClean | Windsor Power | 15 | 09-11-2001 04:40 PM |
| New Mods! - Also, how fast will I go? | 2FastLX | Windsor Power | 0 | 03-20-2001 09:06 AM |