What year and type of motor do I have..

Smokedawg · 08-12-2001, 08:39 PM

On the plate under the distributor it reads as:

19
80

This code is not stamped into the motor, its on a plate about the size of 1in by 1inch..

There is about 4 plates all the way around the motor with the same markings..
In the intake valley it has a 80 towards the front and in the back of the valley it has a 11....On the walls of the valley on both sides in the middle it says: XXX

------------------
347 Stroker Motor: Balanced, Cobra Transmission, Extrude Ported and Polished Upper and ported Lower, GT40 Milled Ported and Polished Heads, B303 Cam, BBK 1 5/8 Headers, 30lb Bosch Injectors, Holley AFPR, March Underdrive Pulleys, Perma-Cool Fan, 3-Core Radiator, Accel Performance Coil, Accel 300+ Racing Wires, Ram Air, K&N Filter, 73mm Vortech MAF, 70mm TB, FlowMaster Exhaust w/BBK Offroad H-Pipe, Hurst Shifter, 3:55 Gears, Ram Clutch, Cross Drilled Rotors, AC and Smog del, rear seat del.

[This message has been edited by Smokedawg (edited 08-12-2001).]

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
What Type Transmission	Kisner	Classic Mustangs	1	02-03-2001 11:30 PM

08-12-2001, 08:39 PM	#4
Smokedawg Tires Fear Me... Join Date: Jan 2001 Posts: 867	On the plate under the distributor it reads as: 19 80 This code is not stamped into the motor, its on a plate about the size of 1in by 1inch.. There is about 4 plates all the way around the motor with the same markings.. In the intake valley it has a 80 towards the front and in the back of the valley it has a 11....On the walls of the valley on both sides in the middle it says: XXX ------------------ 347 Stroker Motor: Balanced, Cobra Transmission, Extrude Ported and Polished Upper and ported Lower, GT40 Milled Ported and Polished Heads, B303 Cam, BBK 1 5/8 Headers, 30lb Bosch Injectors, Holley AFPR, March Underdrive Pulleys, Perma-Cool Fan, 3-Core Radiator, Accel Performance Coil, Accel 300+ Racing Wires, Ram Air, K&N Filter, 73mm Vortech MAF, 70mm TB, FlowMaster Exhaust w/BBK Offroad H-Pipe, Hurst Shifter, 3:55 Gears, Ram Clutch, Cross Drilled Rotors, AC and Smog del, rear seat del. [This message has been edited by Smokedawg (edited 08-12-2001).]