Threaded Mode
© Copyright 1995 thru 2008 - The Mustang Works™. All Rights Reserved.
MustangWorks.com is designed and hosted by Aero3 Media.
MustangWorks.com is designed and hosted by Aero3 Media.
03-07-2005, 03:15 PM
|
#6 |
|
Registered Member
Join Date: Jun 2001
Location: butler pa
Posts: 303
|
Re: 5 lug conversion
im running the 17x8 98 cobras up front on sn95 spindles and they are as close to the outer fenderlip as i would get and at full lock turns they rub a little on the front at the a arm now i know alot of people out there are running 9's up front but they must be limiting the rack and or be setting out past the fender and as far as 10.5's in the back i would imagine the quads will be in the way for sure and you will probably have to roll the fenders i used the the sn95 3/4 inch longer axles and my backspacing is 5.98 and i had to roll the fender with the 8inch wheels if you use these axles you may get the 10.5's in there but you be real close
__________________
92lx wannabe saleen |
|
|
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| 5 lug conversion | stanger9219 | Windsor Power | 2 | 02-25-2004 11:31 PM |
| What all do you need to do rear disc conversion w/ SN95 Parts | KG88GT | Windsor Power | 1 | 07-29-2003 01:45 PM |
| questions about maf conversion | spankaveli | Windsor Power | 10 | 10-19-2002 02:46 PM |
| Spindles for Brake Conversion | Vishnoff | Classic Mustangs | 2 | 08-06-2002 04:12 PM |
| mass air 87GT conversion | greydan | Windsor Power | 3 | 01-02-2002 07:57 PM |