Removing Window Tint

[aaa]

TAKE A RAZOR BLADE TO A CONER AND PEEL THE TOP EDGE IF YOU HAVE GOOD TINT AND WORK SLOW YOU CAN PULL LARGE AMOUNT OFF AT A TIME. I WORK FROM THE TOP DOWN CHEAP TINT TENDS TO BREAK MORE THIS JUST MEANS ALOT MORE TIME. AFTER YOU REMOVE ALL THE FILM THEN YOU MUST REMOVE THE GLUE I USE GLASS CLEANER IN A CAN MADE BY CAR CHEM. I SOAK THE GLASS AND I MEAN SOAK THE GLASS THEN TAKE PAPER TOWELS AND REMOVE THE GLUE. THE MAIN THING IS DONT USE THE RAZOR BLADE ON THE DEFOSTER GRIDS ANY WHERE ELSE IS FINE PEEL AND PULL I HAVE HAD SOME THAT THE WHOLE GLASS COMES OFF IN ONE PULL, OTHERS INCH BY INCH GOOD LUCK!!!