

© Copyright 1995 thru 2008 - The Mustang Works™. All Rights Reserved.
MustangWorks.com is designed and hosted by Aero3 Media.
MustangWorks.com is designed and hosted by Aero3 Media.
![]() |
#1 |
Import Slayer
Join Date: May 1999
Posts: 2,241
|
![]() I finally installed my 3700 stall Edge converter! First thing I immediatly noticed was it no longer had that drastic drop in rpms when going from park into gear and sound like it wanted to stall.
I can hear a slight engine rev when pulling from a stop and from going from cruising speed to full throttle. Throttle response is still nice and crisp though. It used to spin the tires hard in the 1-2 shift but now it's only a tiny chip, if that anymore. This is a C-4 that does not even have a shift kit yet! The engine seems to rev quicker and pull harder. I'm hoping to get to the track at the end of the month for a T&T run. I'll get to see just how much that 2400 stall converter was holding me back. I would like to see a .2 drop in my 60' and another .4 or .5 drop in E.T I'll post my track results when I get to the track. My best run last year was 13.3@104mph. Since then, I have upgraded my fuel system with -8AN line and Holley blue pump with a sumped pump, ditched the 3310 and bought a 750 DP and swapped in my edge converter. I don't know if the fuel system and carb. swap will increase HP or not. What do you guys think?
__________________
'82 GT 351W (.060)Comp Cams 274* Extreme Energy cam, ported & polished heads w/ 1.94/1.60 valves 10.3:1 flat top pistons,stealth intake, Mallory dizzy,Holley 750dp carb, BBK shorties,Flowmaster exhaust,C-4 with 3700 stall converter, B&M pro shifter,8.8 rear, 4:10's, subframes, electric fan, powermaster alternator, 4 core radiator. |
![]() |
![]() |
|
|
![]() |
||||
Thread | Thread Starter | Forum | Replies | Last Post |
Installing new Edge converter....finally! | 82 GT | Windsor Power | 1 | 04-11-2006 01:38 AM |
G-Force T-5 finally completed and installed. | moosejaw | Windsor Power | 12 | 02-27-2004 11:49 PM |
finally installed new trans | billheis | Windsor Power | 4 | 01-11-2004 12:23 AM |
Edelbrock Heads - Finally Installed | NO SLO PK | Windsor Power | 6 | 07-29-2003 11:14 PM |
Finally installed MAC exhaust !!! | JRowlette | Windsor Power | 5 | 07-16-2001 02:11 AM |