Is 350 RWHP Possible ?

[1979bruiser]

every engine combo i see in the magazines for a 302 , they never use 205 or 210cc heads. always 170-185 so i would say afr185 heads and if you waqnt to twist your 5.0 up that high then go w/ the vic jr intake and cm set up. keep in mind that you still only have a 302 and the cinders can only pull so much, now if it were a stroker 347 or larger keep going with the 205 heads.also just becasue they are 205 cc heads does not designate them 3500-8000 rpm opperating range. in a recent magazine smeading performance built a 351w w/ 205 heads and it peaked below 6000 rpms , i think closer to 5500 .chose your cam and intake to work where you want to opperate your rpm range but go w/ 170cc-185cc heads.
dan