MustangWorks.com - The Ford Mustang Power Source!

Go Back   MustangWorks.com : Ford Forums > Mustang & Ford Tech > Classic Mustangs
Register FAQ Members List Calendar

Notices


 
 
Thread Tools Rate Thread Display Modes
Prev Previous Post   Next Post Next
Old 10-15-2000, 02:38 PM   #1
Shaggy
Registered Member
 
Join Date: Feb 1999
Location: Houston,TX
Posts: 466
Post New 60', et, and MPH record

Okay here is what happened. I made my first pass ran a 14.1 at 97 typical for my first run with the heat of the freeway in the motor still. Sencond pass ran a 14.7 at 69 around the 1/8 it shifted thrd good and hard pulled for a second then fell on its nose. I thought I had hurt the tranny. while it was cooling off I got to thinking what if the lincage between the back barrels popped of so I went to look at that and shebang the pedal lincage was binding and has been binding for a long time was only getting 90% throttle or so. I fix that my first pass after that whipped out a 13.4 at 99. I was so stoked I hot lapped it and ran a new best it breaks down like this

r/t - .790 (I have to deep stage the car to get a good r/t. I was shallow staged to get a good et that night)
60' - 1.89 (I was stoked when I saw the my previous best was a 1.98. I am on BFG comp ta street radials 245/50/14)

330 - ??? the 330 and 1000 ft timer are broke
1/8 - 8.431
1/8 mph - 82.34

1000 - ???

1/4 - 13.293 (my previous best was 13.85)
1/4 mph - 100.00 (broke the century mark finally!!! I went on to make a best mph of 100.15 but I only ran a 13.34 on that pass.)

I felt like an ignoramous hen I set up the throttle lincage I made sure I would get full throttle Now I wonder what I was looking at.I can't wait to get back out there on my good tires I still left ultra soft compared to my good tires I hope there is a 1.7 in tires matbe I can run a 12 with my set up.

My set up is as follow 67 falcon, 3.25 gears, c-6, 289, ede rpm intake, 750 mechanical secondarys, 351 heads chevy 1.94,1.60 valves, 1 3/4 long tubes, and a cam from a lightning truck.

[This message has been edited by Shaggy (edited 10-15-2000).]
Shaggy is offline   Reply With Quote
 



Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 10:56 PM.


SEARCH