What do I need to put an efi(5.0)in 68 mustang

10-19-2000, 06:01 PM

are you using an auto or stick trans? you will need to use the oilpan off your 68 302 and pickup tube. are you using carb or efi? on my 67 i kept the v-belt style waterpump/aternator pulleys along with old style pump. 5.0 has sepentine with reverse flow pump. i also changed the dip stick/tube to be sure it worked with old style pan so i drilled the hole in the front right side of the aluminum timing chain cover and put it there. then i plugged the hole in the left side of the block where the 5.0 stick goes. i plugged the exaust holes in the back of the 5.0 heads...where the exaust crossover tube is. us old motor mounts. i really need more info to advise you further, carb or efi and what transmission??? remeber the 302 as the 5.0 is externally balanced so be sure to us the flexplate/flywheel with the correct harmonic balancer. ive done this conversion and i can help you. you will be very pleased with the results.

------------------
67stang coupe, carb on 5.0, 4 speed, 4.11's....8.33 @ 83 in 1/8 mile wantings 7's

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Safety Issue 64 - 70 Mustangs	Mach1 Cobra Jet	Classic Mustangs	20	07-11-2005 08:06 PM
Yellow Mustang Stampede TULSA OK August 17	stylin99	Ford Show & Go	2	11-09-2004 11:19 PM
t-5, is it the same in the 4 cylinder and V8	ex-lt1-guy	Windsor Power	12	03-03-2002 01:59 AM
89-Mustang pulling trailer -vs- 2000 Mustang	Five0	Stang Stories	7	04-01-2001 02:50 AM
Salaeen, Shelby, Cobra please define these for me.	Taqus	Blue Oval Lounge	3	01-17-2001 02:39 AM

10-19-2000, 06:01 PM	#2
make7UPYOURS Guest Posts: n/a	are you using an auto or stick trans? you will need to use the oilpan off your 68 302 and pickup tube. are you using carb or efi? on my 67 i kept the v-belt style waterpump/aternator pulleys along with old style pump. 5.0 has sepentine with reverse flow pump. i also changed the dip stick/tube to be sure it worked with old style pan so i drilled the hole in the front right side of the aluminum timing chain cover and put it there. then i plugged the hole in the left side of the block where the 5.0 stick goes. i plugged the exaust holes in the back of the 5.0 heads...where the exaust crossover tube is. us old motor mounts. i really need more info to advise you further, carb or efi and what transmission??? remeber the 302 as the 5.0 is externally balanced so be sure to us the flexplate/flywheel with the correct harmonic balancer. ive done this conversion and i can help you. you will be very pleased with the results. ------------------ 67stang coupe, carb on 5.0, 4 speed, 4.11's....8.33 @ 83 in 1/8 mile wantings 7's