Going CAM CRAZY!!!

Capri306 · 02-09-2001, 06:04 PM

Thanks for all of your recommendations, guys. I'm leaning towards the CompCams XE266HR. Their description is "mild mods, 3.27-3.73 gears, mass air, larger throttle body." It has 266*/274* ad. duration and 216*/224* @ 0.050", with .544/.555 lift! Wow, gonna have to check my piston-to-valve clearance, aren't I? If it doesn't fit, I'll go with the XE258HR. I think that's the one you're talking about, Mach1. I know what you mean, it's a toss-up between the Crane 2030 and the XE258HR right now. Ugh, decisions, decisions...

Those Xtreme energy cams look like my bag so far: designed to be computer compatible, plenty of lift, and just enough duration to make horse but not so much as to kill driveability. Oh, the LSA is 112 degrees, btw. I'm might call a few of these companies up and ask just 'cause I want everybody's input before deciding. You guys are reading me perfectly on what I want to do, though. Thanks!

------------------
Capri306, Moderator, The Mustang Works Online
1979 Mercury Capri, 5.0L -- C4 -- 2.73
1987 Mustang LX Notch

<--- New Timeslips

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
a friendly invite to Crazy Horse and anyone else	this is not cbring	Blue Oval Lounge	1	05-16-2003 10:47 PM
am i crazy?	srv1	Blue Oval Lounge	19	11-20-2002 10:16 PM
Crazy horse...	joe4speed	Blue Oval Lounge	44	05-27-2002 11:29 PM
My rediculously crazy, somewhat crappy day of racing, etc.	StoplightWarrior	Stang Stories	2	04-27-2002 05:27 PM
'89 F-150 idles at 1,700 RPM driv'n me crazy!	351WCapri	Built Ford Tough	0	04-28-2001 02:32 PM

02-09-2001, 06:04 PM	#9
Capri306 Moderator Join Date: Sep 1998 Location: Grand Rapids, Michigan, USA Posts: 1,001	Thanks for all of your recommendations, guys. I'm leaning towards the CompCams XE266HR. Their description is "mild mods, 3.27-3.73 gears, mass air, larger throttle body." It has 266/274 ad. duration and 216/224 @ 0.050", with .544/.555 lift! Wow, gonna have to check my piston-to-valve clearance, aren't I? If it doesn't fit, I'll go with the XE258HR. I think that's the one you're talking about, Mach1. I know what you mean, it's a toss-up between the Crane 2030 and the XE258HR right now. Ugh, decisions, decisions... Those Xtreme energy cams look like my bag so far: designed to be computer compatible, plenty of lift, and just enough duration to make horse but not so much as to kill driveability. Oh, the LSA is 112 degrees, btw. I'm might call a few of these companies up and ask just 'cause I want everybody's input before deciding. You guys are reading me perfectly on what I want to do, though. Thanks! ------------------ Capri306, Moderator, The Mustang Works Online 1979 Mercury Capri, 5.0L -- C4 -- 2.73 1987 Mustang LX Notch <--- New Timeslips