Baseline

[97snakedriver]

That is very bad. Either something is wrong with your car, or it was dynoed incorrectly. There is an approximently 15% loss from the flywheel to the wheels, which means you are only making about 210 hp and 285 ft/lbs of torque.

Most Cobras put out more like 260 hp and 255 torque at the wheels. Some more, some less, but you are way off.

------------------
'97 Cobra, K&N, Flowmaster, subframes, 4.10 gears, Steeda Tri-Ax shifter, Steeda G-Trac 3, Cobra R wheels w/ Goodyear F1s

[This message has been edited by 97snakedriver (edited 05-01-2000).]