Hybrid Mode
© Copyright 1995 thru 2008 - The Mustang Works™. All Rights Reserved.
MustangWorks.com is designed and hosted by Aero3 Media.
MustangWorks.com is designed and hosted by Aero3 Media.
|
|
12-14-2001, 01:27 AM
|
#1 |
|
Registered Member
Join Date: Oct 2000
Location: Ontario, Canada
Posts: 234
|
BTW the easiest way to tell if they are UD is if the crank pully is smaller than the WP.
If the WP is UD it is actually larger than the stock WP pully. So either way the UD crank pully will be smaller. BTW if they are all UD pullies(not miss-matched) The stock belt should fit. Alot of them are designed this way so you don't need to buy a new belt. Good luck. If you have the right belt U just remember the size. But I take it your just curious.
__________________
82 Mercury Capri 302, Comp. Cams, Tremec 3550, 3.73's, 12.8@106 N/A Kevin's Capri Kevin's Mustang |
|
|
 |
| Thread Tools | |
| Display Modes | Rate This Thread |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| 16" Wheels 0n 67-68 - Tire Sizes? | Baxter | Classic Mustangs | 3 | 12-23-2003 12:20 PM |
| something behind the pully. | fordkid68 | Classic Mustangs | 23 | 04-30-2003 08:48 AM |
| alternator pulley to crank pully ratio | redrider | Windsor Power | 0 | 12-18-2002 11:43 AM |
| Steeda pully install = oil leak?!! | Rally | Modular Madness | 7 | 04-05-2002 02:58 PM |
| HELP! need spkr sizes for a '94 GT | 929PhoenixSquid | Windsor Power | 5 | 12-22-2001 02:02 PM |