Bilstein Shocks?

FdMust88 · 12-14-2001, 05:16 PM

Where can I get a complete set of Bilsteins for my 91LX 5.0 at a reasonable price?

Thanks..

Stang Runner · 12-14-2001, 05:33 PM

Look Here I got mine from them.

FdMust88 · 12-14-2001, 10:07 PM

Stang Runner.. Which set are you running? The HD, Sport, ?? And how do you like them?? And what springs are you using...

Stang Runner · 12-14-2001, 11:27 PM

I have HD and H&R springs Super sport from them too.

autoX · 12-17-2001, 10:18 AM

I put the same set up on my brothers car as Stang Runner (non-adjustable Bilsteins and H&R SuperSports from Maximum Motorsports) I was extreemly impressed! The spring rate is pretty high, but the Bilsteins really handle the springs well... Would probably go that combo on my car if I were to do things over again.

12-14-2001, 05:16 PM	#1
FdMust88 Registered Member Join Date: Apr 1999 Location: Massachusetts Posts: 84	Bilstein Shocks? Where can I get a complete set of Bilsteins for my 91LX 5.0 at a reasonable price? Thanks.. __________________ 91LX, Modifications include: MAC Cold Air Induction Kit, MAC Headers and Cat-Back Exhaust, BBK H-Pipe, Edelbrock 70mm T.B., Pro-M 75mm MAF, MSD Wires and coil, NGK plugs, Pro 5.0 shifter, Underdrive Pullies, Kirban Fuel Pressure Regulator, Koni Adj. Sport struts & shocks, FMS springs, Maximum Motorsports Caster/Camber Plates, Strut tower brace, Kirkey Seats, and some Autometer gauges. Probably a few things I've forgotten also.. 1991 Mustang LX

12-14-2001, 05:33 PM	#2
Stang Runner Registered Member Join Date: Jun 1999 Location: Walker, MI, USA Posts: 1,202	LOL Good Prices Look Here I got mine from them. __________________ Engine: steel mounts, Under drive pulleys, K&N, GT-40 Intake ported Lower, No power steering, No A/C, Mac cold intake, 65MM TB, 255 Fuel pump, 24's, AFR 165 58cc, Rocker Arms 1.7with the stock Cam, 1 5/8 short headers, offRoad X-pipe Drive Train: 3.55, T-5 with a Pro 5.0 shifter 12.656@107.71MPH See It at www.T-racing.com/mustang.htm

12-14-2001, 10:07 PM	#3
FdMust88 Registered Member Join Date: Apr 1999 Location: Massachusetts Posts: 84	Stang Runner.. Which set are you running? The HD, Sport, ?? And how do you like them?? And what springs are you using... __________________ 91LX, Modifications include: MAC Cold Air Induction Kit, MAC Headers and Cat-Back Exhaust, BBK H-Pipe, Edelbrock 70mm T.B., Pro-M 75mm MAF, MSD Wires and coil, NGK plugs, Pro 5.0 shifter, Underdrive Pullies, Kirban Fuel Pressure Regulator, Koni Adj. Sport struts & shocks, FMS springs, Maximum Motorsports Caster/Camber Plates, Strut tower brace, Kirkey Seats, and some Autometer gauges. Probably a few things I've forgotten also.. 1991 Mustang LX Last edited by FdMust88; 12-14-2001 at 10:21 PM..

12-14-2001, 11:27 PM	#4
Stang Runner Registered Member Join Date: Jun 1999 Location: Walker, MI, USA Posts: 1,202	I have HD and H&R springs Super sport from them too. __________________ Engine: steel mounts, Under drive pulleys, K&N, GT-40 Intake ported Lower, No power steering, No A/C, Mac cold intake, 65MM TB, 255 Fuel pump, 24's, AFR 165 58cc, Rocker Arms 1.7with the stock Cam, 1 5/8 short headers, offRoad X-pipe Drive Train: 3.55, T-5 with a Pro 5.0 shifter 12.656@107.71MPH See It at www.T-racing.com/mustang.htm

12-17-2001, 10:18 AM	#5
autoX Registered Member Join Date: Nov 1998 Location: Portland, OR Posts: 113	I put the same set up on my brothers car as Stang Runner (non-adjustable Bilsteins and H&R SuperSports from Maximum Motorsports) I was extreemly impressed! The spring rate is pretty high, but the Bilsteins really handle the springs well... Would probably go that combo on my car if I were to do things over again. __________________ Red '90 GT - My Daily Driver (& weekend warrior) w/ Kenny Brown braces & Springs, Koni Yellows, Caster/Camber Plates, Factory Five Control arms, Poly Bushings, 3.55 gears, Hurst shifter, Dynomax cat-back, Cervini 2 1/2 cowl. Griggs torque-arm, & panhard bar waiting for installation! Viper Blue '85 GT Convertible - Subframes, Holley Street Avenger Carb, Polished ROH ZR6, full Autometer Phantom gauges.

Thread Tools
Show Printable Version Email this Page
Display Modes	Rate This Thread
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode	Rate This Thread:

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Bilstien and Steeda shocks	GodStang	Corner Carvers Delight	2	03-24-2003 04:49 PM
Questions about Quad Shocks???	LetsGo	Windsor Power	4	07-14-2002 02:09 PM
Air shocks vs. Air bag.	Coupe Devil	Windsor Power	1	11-13-2001 11:22 AM
Rear tires rubbing, will shocks help?	Stang_ROTY	Windsor Power	1	08-20-2001 10:51 PM
Shocks and Struts	Jerm95gt	Windsor Power	5	06-26-2001 02:26 PM