Should I swap in 4.10's for my 3.73's- please read

[Rick 91GT]

Originally posted by Killercanary:
Thanks JONNYK- that's what Ed told me. He said that since I have such a heavy car I need the extra gear to get me moving and into the power band. Thanks for the info on the MPH at 6000RPM's- that's about what Ed told me tonight. Looks like they are going in this week.

If Ed is custom grinding a cam for you it has a lot to do with the gears you have. FOr instance my Anderson cam is made for a car with 4:30 or higher gears due to the low lift numbers with less gear it would be a PIA at low rpms. Go for 4:10's!



------------------
Check Out My Site 91GT,Holley SysteMAX II Kit-Heads 2.02" x 1.60" port matched to a 1262,Anderson N-61,24#,76mm C&L,Full MAC exhaust 1-5/8" Long tubes,2-1/2" O.R H-Pipe,2 1/2" cat back, No A/C or PS or emissions, 12" K&N Filter,RNH PERFORMANCE Ram Air,Ron Davis Radiator,Full Suspension,S&W 8pt "X" brace,JAZ seats,3:73's,Welds..etc,4:30's and 31 splines coming very soon!