Threaded Mode
© Copyright 1995 thru 2008 - The Mustang Works™. All Rights Reserved.
MustangWorks.com is designed and hosted by Aero3 Media.
MustangWorks.com is designed and hosted by Aero3 Media.
01-05-2002, 06:12 PM
|
#12 |
|
Registered Member
Join Date: Nov 1998
Location: Sugarland, TX USA
Posts: 161
|
My 3.27 gear is not too bad at the track! 1.394 60', 10.324 et...
Really it depends on what you want to do and how you are set up. For your particular application I would stay with the 2.73. If you are not going race anybody from zero why change gears? From a roll the 2.73 will be just as good as a 3.73, maybe better depending on speed. One concern is your clutch. It will last longer with a lower gear. Takes less slippage to get you moving the lower the gear. A 3.55 or even 3.73 would be a good street/track compromise if you planned to race at the track.
__________________
88 347, Twisted wedge heads,Comp Cams 224/230 cam, 1/4=10.324 @ 126.95, 60' = 1.394 http://xs-fx.com/raughammer/larrysample.htm |
|
|
| Thread Tools | |
| Display Modes | Rate This Thread |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| 3.55 gears. | 66StangGuy | Classic Mustangs | 6 | 08-12-2002 02:40 PM |
| 3.55 vs. 3.73 | TwiLighTBluEGT | Windsor Power | 8 | 06-21-2002 12:44 PM |
| 3.55 or 3.73? | DemonGT | Windsor Power | 17 | 06-15-2001 01:54 AM |
| 3.55, 3.73 or 4.10 | Mouse Eater | Windsor Power | 12 | 01-15-2001 08:03 AM |
| 3.25 or 3.55 | Rizz67 | Classic Mustangs | 2 | 01-03-2001 11:12 AM |