does this make scence at all??

[93CobraR]

Originally posted by jchambers:
Just as a suggestion, you might want to try 24# yourself. I'd say your MPH is a little low for your combination. If you could try 24# you might be able to pick up a bit. For comparison, with my GT-40 irons, E-cam and shorty headers I ran 12.50's all day at 107+ weighing in at more than 3300#. You ET isn't really that far off, but the MPH is showing that you're down a little on top end HP. The 1" space might account for some of it too though but I think I'd try some larger injectors.

Just some 'been there, done that'.

I have more then enough fuel now. My pressure is only at 40, and my et drop with a increase in pressure. My car is damn fast for what I have done, it a full weighted car, with just Gt-40 heads, and stock cam, stock intake, stock bottom end with 128k on it. Try taking a car and doing that and running a 12 with it. That is a great mph for the mods. Once I put my cam and intake on it should be done in the low 12's. Just a thought to give you more info on my combo.


------------------
87 GT, 4 inch cowl hood,17x9 Cobra R's/255/45's,GT-40 heads,long tubes headers,h-pipe,Flows,BBK cold air, Mass air,70mm MAF, 1.7's, 1" spacer,underdrive pulleys,Pro 5.0, King Cobra, Adj. fuel Reg., Lakewood Lift Bars,50/50's,subframes, 4.10's.
Best time 12.96
Best MPH 103.42
Best 60' 1.695

Visit my site at:
http://www.geocities.com/cobrar93_2000/MyPage.html