How do these times look?

Killercanary · 03-29-2001, 10:32 PM

Way to go Clint!!! I knew you'd break into the 13's. You already said it but you need to cut that fuel back buddy. The homemade air tube- well you know how good it worked for me- 1 tenth and 1mph. I really don't think you need an ignition, at least not yet, with a NA motor the factory unit will suffice. Why do you want to go 12's with 3.08's? I just swapped out my 3.73's for 4.10's tonight to get my heavy sled up and running, I also replaced the clutch pack in my rear, so I should cut 1.8 60's now, if I don't something is wrong. My posi was so bad that I had broken off all the clips on the disc in the rear! I'm lucky it didn't lock up on me. I got my AFR heads last night, now I'm just waiting for my FTI cam and FMS RR's. Keep me posted as to how you do. I'm going to the track sunday, hopefully I'll knock out a 13.7 with some luck.

------------------
95 GT convt' 5 speed, 3.73's,FMS HD clutch, Pro 5.0 shifter, ASP alum. underdrive pulleys, Bassani offroad X pipe, 2 chmbr flowmasters, K&N w/o silencer, edelbrock performer intake, FRPP 65mm T-body, FRPP shorty headers, FRPP aluminum driveshaft.Hooker 4pt chrome car bar, Xenon/Wings West ground effects, custom interior
Best ET: 13.83
Best MPH: 98.55mph with Best 60': 1.91 on Nitto DR's
Homepage: <A HREF="http://www.angelfire.com/pa2/killercanary" TARGET=_blank>http://www.angelfire

Thread Tools
Show Printable Version Email this Page
Display Modes	Rate This Thread
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode	Rate This Thread:

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Check out these times and tell me how i can get better!	1jimmy__d	Stang Stories	6	06-24-2003 01:07 PM
Track Times With the new Tires!!!!!	Stang Runner	Stang Stories	6	10-20-2002 08:31 PM
New Track times On the good old SD and STOCK Short block	Stang Runner	Stang Stories	1	10-10-2002 06:25 PM
4cyl times and #'s??	HiFlow5 0	Blue Oval Lounge	11	03-25-2002 10:23 AM
New times new times .what would traction net me?	SKYWLKR	Windsor Power	3	01-14-2002 08:34 PM

03-29-2001, 10:32 PM	#2
Killercanary Registered Member Join Date: Nov 1999 Location: Altoona, PA Posts: 336	Way to go Clint!!! I knew you'd break into the 13's. You already said it but you need to cut that fuel back buddy. The homemade air tube- well you know how good it worked for me- 1 tenth and 1mph. I really don't think you need an ignition, at least not yet, with a NA motor the factory unit will suffice. Why do you want to go 12's with 3.08's? I just swapped out my 3.73's for 4.10's tonight to get my heavy sled up and running, I also replaced the clutch pack in my rear, so I should cut 1.8 60's now, if I don't something is wrong. My posi was so bad that I had broken off all the clips on the disc in the rear! I'm lucky it didn't lock up on me. I got my AFR heads last night, now I'm just waiting for my FTI cam and FMS RR's. Keep me posted as to how you do. I'm going to the track sunday, hopefully I'll knock out a 13.7 with some luck. ------------------ 95 GT convt' 5 speed, 3.73's,FMS HD clutch, Pro 5.0 shifter, ASP alum. underdrive pulleys, Bassani offroad X pipe, 2 chmbr flowmasters, K&N w/o silencer, edelbrock performer intake, FRPP 65mm T-body, FRPP shorty headers, FRPP aluminum driveshaft.Hooker 4pt chrome car bar, Xenon/Wings West ground effects, custom interior Best ET: 13.83 Best MPH: 98.55mph with Best 60': 1.91 on Nitto DR's Homepage: <A HREF="http://www.angelfire.com/pa2/killercanary" TARGET=_blank>http://www.angelfire