MustangWorks.com - The Ford Mustang Power Source!

Go Back   MustangWorks.com : Ford Forums > Mustang & Ford Tech > Windsor Power
Register FAQ Members List Calendar Mark Forums Read

Notices


 
 
Thread Tools Rate Thread Display Modes
Prev Previous Post   Next Post Next
Old 03-31-2001, 01:02 PM   #4
silver_pilate
DURKA DURKA!!
 
silver_pilate's Avatar
 
Join Date: Sep 1997
Location: Lubbock, TX...(TX panhandle)
Posts: 1,418
Post

For an AOD car, the best mod you can make will be a 2800 rpm stall converter, a shift kit, and a set of 3.73 gears. Those together would put you pretty close to the $1000 mark if you do the converter install yourself.

If you don't want the gears right now (although you really need them to wake up the AOD), you may look into a converter and a Lentech valve body (awesome units that extend tranny life and shift faster and more consistant than a 5-speed...oh yeah, you get to control the shifts as well).

I'm suggesting tranny mods right now because the AOD is the weakest link in your car. It takes some money, but with the right parts, it will run like a 5-speed and get you off the line just as fast, and I guarantee that you will enjoy driving the car 100% more.

On the other hand, if you're contemplating swapping a T-5 in the future, you could skip working on the tranny and go for gears and full exhaust with perhaps enough to change out the throttle body and MAF.

------------------
--silver_pilate

'91 GT, Built 306, Wolverine 1087 cam, ported Windsor Jr. Irons, and all the goodies...click the link to the left to see a full list of my mods...

Tried and True 302 Being Built to Outrun You! heh heh heh...
--Texas Panhandle--
Check out my site
silver_pilate is offline   Reply With Quote
 


Thread Tools
Display Modes Rate This Thread
Rate This Thread:

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Updated paxton novi 1000 kits mike72678 Power Adders 1 03-27-2003 08:05 PM
HELP: Problems after Paxton Novi 1000 install Meatman Windsor Power 3 10-17-2002 06:03 PM
1000 - 1500 grit scale Windsor Power 3 09-13-2002 01:51 PM
Getting Novi 1000 installed Wed. Chris_H Windsor Power 3 12-31-2001 07:22 PM
AC vents don't blow? i need a blow (haha) Super_Stang Windsor Power 3 07-31-2001 12:26 PM


All times are GMT -5. The time now is 10:10 AM.


SEARCH