MustangWorks.com - The Ford Mustang Power Source!

Go Back   MustangWorks.com : Ford Forums > Mustang & Ford Tech > Windsor Power
Register FAQ Members List Calendar Mark Forums Read

Notices


Reply
 
Thread Tools Rate Thread Display Modes
Old 03-16-2002, 12:47 PM   #1
Capri306
Moderator
 
Capri306's Avatar
 
Join Date: Sep 1998
Location: Grand Rapids, Michigan, USA
Posts: 1,001
Default

I disagree with almost everything except a sticking EGR valve. That's rare for a complete no-start, but possible. I'm banking on the coolant temperature sensor (CTS). Reason being that the computer bases injector pulse width on the coolant temperature. If it won't fire in cold, but will when it's warm, logic tells you that the engine is simply stuck starting lean. The CTS is most likely stuck high. If it's never been replaced, I'd suggest doing so. I did on my '87 notch, and the car has started perfectly ever since. Before, I had a few problems starting when it was particularly cold. Very similar to what you're describing. Check your computer codes and see if the computer is reporting problems with it. However, it's also very likely that it WON'T because it will assume everything's OK if it's within certain parameters. All the computer knows about the coolant temp is what the sensor is interpreting.

BTW, the CTS is the large gray thing screwed into the metal heater pipes on the passenger side of the engine, right on top. I would NOT use any sealant or tape on it, they come pre-gooped at most parts stores. Good luck!
__________________
Capri306, Moderator
The Mustang Works Online

1979 Mercury Capri
1987 5.0L Mustang LX Notchback
1993 5.8L Eddie Bauer Bronco
Capri306 is offline   Reply With Quote
Reply


Thread Tools
Display Modes Rate This Thread
Rate This Thread:

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
ignition problems blk88lx Windsor Power 3 10-26-2002 05:06 PM
Ignition problems Scrapla Windsor Power 3 04-26-2002 08:01 PM
ignition timing problems MetalHead Classic Mustangs 7 03-21-2002 07:28 PM
ignition problems Modified Classic Mustangs 7 05-09-2000 09:58 AM
ignition problems, please help, races coming up this weekend mussy Classic Mustangs 1 07-23-1999 08:35 AM


All times are GMT -5. The time now is 01:19 PM.


SEARCH