auto trans experts

Mach 1 · 04-18-2001, 08:00 AM

Haynes sells a manuael for this at the auto parts store. its in with all the chiltons type books. I was considering doing the same thing myself. I bought a GER AOD with one piece input shaft, non-lockup, balanced, high performance clutches, etc...for around $1100.00 I was planning on re-building my original AOD, but never got around to it.

Anyway, I glanced over the haynes tranny overhaul manuael, and it looks fairly simple. You can get by with basic tools, (might have to modify a screwdriver or something). I would give it a shot. Someone else on this board did it themselves with no mechanical experience, and they had success also. The last time I had an auto ripped apart (not counting shift-kit install)was in high school shop (16 years ago)and I think it was a c-4 or a gm 350, but it was easy to rebuild. just a butch of clutch plates and crap. it looks intimidating, but with the book, i think you will be fine.

Even if you pull the tranny yourself and carry it into the shop to be overhauled will save you some big bucks.

------------------
1993 GT/AOD
'93 Mustang GT

Thread Tools
Show Printable Version Email this Page
Display Modes	Rate This Thread
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode	Rate This Thread:

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Best auto trans. fluid?	twilightcall	Windsor Power	3	06-24-2003 10:39 PM
Auto Trans Question	93CougarXR7	Windsor Power	2	08-04-2002 02:10 PM
Auto Trans Cooler Question	NewStang02	Small Ponies	2	06-18-2002 07:58 PM
71 mustang auto trans not working	BIGTHOO	Classic Mustangs	2	04-24-2002 06:49 PM
auto trans C6 vs. FMX vs. C4	Kcode351	Classic Mustangs	4	05-12-2000 09:00 AM

04-18-2001, 08:00 AM	#2
Mach 1 Registered Member Join Date: May 1999 Location: Georgia Posts: 3,866	Haynes sells a manuael for this at the auto parts store. its in with all the chiltons type books. I was considering doing the same thing myself. I bought a GER AOD with one piece input shaft, non-lockup, balanced, high performance clutches, etc...for around $1100.00 I was planning on re-building my original AOD, but never got around to it. Anyway, I glanced over the haynes tranny overhaul manuael, and it looks fairly simple. You can get by with basic tools, (might have to modify a screwdriver or something). I would give it a shot. Someone else on this board did it themselves with no mechanical experience, and they had success also. The last time I had an auto ripped apart (not counting shift-kit install)was in high school shop (16 years ago)and I think it was a c-4 or a gm 350, but it was easy to rebuild. just a butch of clutch plates and crap. it looks intimidating, but with the book, i think you will be fine. Even if you pull the tranny yourself and carry it into the shop to be overhauled will save you some big bucks. ------------------ 1993 GT/AOD '93 Mustang GT