1995 gt

Killercanary · 05-03-2001, 10:20 AM

Well, since I have 90% of what you do and I know I run 13.8's at 98mph with 1.91 60's, and my car weighs around 3700lbs with me, I'm gonna guess a 60' of 2.05-2.09, a 1/4 ET of 14.15-14.25 at around 96.7-97.1mph. Throw some 4.10's in there and it'd run even better!!! I'm assuming you'd be slower becuase of the added weight of the tranny, and it is an AODE, but that Lentech will help along with the converter. Well, what did you run?
BTW- do you have an adjustable FPR or headers? The FPR added almost 20RWHP by bumping up the fuel pressure on the dyno, and the factory headers are a joke for performance. With the intake, headers,and T-body I gained about 2-2.5mph.

------------------
95 GT convt' 5 speed, 3.73's,FMS HD clutch, Pro 5.0 shifter, ASP alum. underdrive pulleys, Bassani offroad X pipe, 2 chmbr flowmasters, K&N w/o silencer, edelbrock performer intake, FRPP 65mm T-body, FRPP shorty headers, FRPP aluminum driveshaft.Hooker 4pt chrome car bar, Xenon/Wings West ground effects, custom interior
Best ET: 13.83
Best MPH: 98.55mph with Best 60': 1.91 on Nitto DR's
Homepage: <A HREF="http://www.angelfire.com/pa2/killercanary" TARGET=_blank>http://www.angelfire

Thread Tools
Show Printable Version Email this Page
Display Modes	Rate This Thread
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode	Rate This Thread:

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Are all 8.8 rears the same?	82 GT	Windsor Power	29	08-23-2004 01:06 PM
Tips on buying an 87 GT(is it really a GT?)	LincoConti87	Windsor Power	9	07-23-2004 08:08 PM
Wont Start, help! 1995 GT 5.0	Year2001Boogie	Windsor Power	13	05-05-2004 09:26 PM
1996 Cobra vs 1995 GT and an Eclipse	Milktasd	Stang Stories	10	02-04-2002 03:02 PM
ran a '01 GT	EZRIDN	Stang Stories	3	08-29-2001 08:17 PM

05-03-2001, 10:20 AM	#6
Killercanary Registered Member Join Date: Nov 1999 Location: Altoona, PA Posts: 336	Well, since I have 90% of what you do and I know I run 13.8's at 98mph with 1.91 60's, and my car weighs around 3700lbs with me, I'm gonna guess a 60' of 2.05-2.09, a 1/4 ET of 14.15-14.25 at around 96.7-97.1mph. Throw some 4.10's in there and it'd run even better!!! I'm assuming you'd be slower becuase of the added weight of the tranny, and it is an AODE, but that Lentech will help along with the converter. Well, what did you run? BTW- do you have an adjustable FPR or headers? The FPR added almost 20RWHP by bumping up the fuel pressure on the dyno, and the factory headers are a joke for performance. With the intake, headers,and T-body I gained about 2-2.5mph. ------------------ 95 GT convt' 5 speed, 3.73's,FMS HD clutch, Pro 5.0 shifter, ASP alum. underdrive pulleys, Bassani offroad X pipe, 2 chmbr flowmasters, K&N w/o silencer, edelbrock performer intake, FRPP 65mm T-body, FRPP shorty headers, FRPP aluminum driveshaft.Hooker 4pt chrome car bar, Xenon/Wings West ground effects, custom interior Best ET: 13.83 Best MPH: 98.55mph with Best 60': 1.91 on Nitto DR's Homepage: <A HREF="http://www.angelfire.com/pa2/killercanary" TARGET=_blank>http://www.angelfire