Heat Problems Continue

Fostang · 05-03-2001, 07:58 PM

Are you sure you have the fan wired correctly. If the fan is put in front of the radiator it needs to be wired black wire to power and red wire to ground but if it is place behind the radiator it goes red to power and black to ground. Oh yeah and please don't use just the sensor on that you got with the elecric fan. Always have a manual overide. When I had my fan wired just to the sensor boy did it get hot or what. It's a good idea to have both types because sometimes you forget to turn it on manually.

------------------
67'fastback-Edelbrock carb,intake,cam,valve springs.Rhode lifters, CompCam rocker arms, windage tray,cerama coated headers,dual flows with H-pipe, modded c-4,tci stall converter,perma cool electric fan,aluminum water pump,griffen aluminum radiator,accel 8.8 cable,wide cap distriburator,magnetic pick up,v-matic hurst shifter,edelbrock performer nitrous, carter electric fuel pump,ignitor coil,solid motor mounts,magna racing suspension,poly urathane bushings,under rider traction bars, comp. eng. s

Thread Tools
Show Printable Version Email this Page
Display Modes	Rate This Thread
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode	Rate This Thread:

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Engine Idle Problems Continue	mimicons	Windsor Power	4	02-20-2003 04:30 PM
'65 - Pull Away Problems - Action Plan	geordie	Classic Mustangs	0	05-14-2002 01:43 PM
Street heat or track heat	sedanman	Windsor Power	11	11-24-2001 10:34 PM
TFS street or track heat heads??	DemonGT	Windsor Power	7	08-17-2001 12:13 AM
Problems with TFS engine combo..wont idle right and sputters when you give it throttl	dashapht	Windsor Power	8	07-17-2001 12:23 AM

05-03-2001, 07:58 PM	#1
Fostang Registered Member Join Date: Feb 2001 Location: Stockton, Ca Posts: 599	Are you sure you have the fan wired correctly. If the fan is put in front of the radiator it needs to be wired black wire to power and red wire to ground but if it is place behind the radiator it goes red to power and black to ground. Oh yeah and please don't use just the sensor on that you got with the elecric fan. Always have a manual overide. When I had my fan wired just to the sensor boy did it get hot or what. It's a good idea to have both types because sometimes you forget to turn it on manually. ------------------ 67'fastback-Edelbrock carb,intake,cam,valve springs.Rhode lifters, CompCam rocker arms, windage tray,cerama coated headers,dual flows with H-pipe, modded c-4,tci stall converter,perma cool electric fan,aluminum water pump,griffen aluminum radiator,accel 8.8 cable,wide cap distriburator,magnetic pick up,v-matic hurst shifter,edelbrock performer nitrous, carter electric fuel pump,ignitor coil,solid motor mounts,magna racing suspension,poly urathane bushings,under rider traction bars, comp. eng. s