Hybrid Mode
© Copyright 1995 thru 2008 - The Mustang Works™. All Rights Reserved.
MustangWorks.com is designed and hosted by Aero3 Media.
MustangWorks.com is designed and hosted by Aero3 Media.
|
|
05-24-2002, 01:27 PM
|
#1 |
|
Junior Member
Join Date: Mar 1999
Location: Ventura, California
Posts: 8,981
|
That's a real easy test, but in case you aren't sure, I'll tell you what to do.
1) Disconnect the 60 pin connector from the ECM. 2) Test for KOEO voltage between pins 1 and 40 or 60 at the 60 pin connector. If you get 10.5 vdc or more, the ECM is bad. If you don't get 10.5 vdc, start tracing the wires and find the open circuit. Take care, -Chris
__________________
Webmaster: Rice Haters Club Jim Porter Racing Peckerwoods Pit Stop Support Your Local
RED & WHITE! |
|
|
 |
| Thread Tools | |
| Display Modes | Rate This Thread |
|
|