MustangWorks.com - The Ford Mustang Power Source!

Go Back   MustangWorks.com : Ford Forums > Website Community > Stang Stories
Register FAQ Members List Calendar Mark Forums Read

Notices


 
 
Thread Tools Rate Thread Display Modes
Prev Previous Post   Next Post Next
Old 06-05-2002, 09:32 PM   #18
trey193
Registered Member
 
Join Date: Feb 2002
Location: Rockport , IN
Posts: 16
Default

So Venomous do U think the A9L and meter swap netted U much if any?? I expected to see your trap speeds go up no matter what your 60foot times were. If U had a valve spring break the next two mods I would do to your car would be the E cam and a good set of valve springs! When I changed to my E-cam my car had and still has just over 17,000 miles, I talked to numerous people and they said that I should change my springs even with the low mileage. Do the cam and spring swap and U will be on your way. Besides your average bolt ons only difference in our cars is my E-cam and valve springs, my car shouldnt be 8mph faster than yours, U have weak valve springs I am thinking and that is holding u back right now, heck if U R gonna change the springs though U might as well put a descent cam in the car! Dont worry U will get there! Later!
__________________
93 Cobra> Red with black cloth, 17,000 miles, stock longblock with E-cam and motorsport valve springs, C&L 76, A9L computer, AFPR, 255intank, ASP Pulleys, Longtubes and full exhaust, 3.55's everything else is stock down to the sparkplugs! Best et to date is 12.85@108.9 on BFG's. 1.95 60ft so there is more in it!! pics @ www.southrides.com
trey193 is offline   Reply With Quote
 


Thread Tools
Display Modes Rate This Thread
Rate This Thread:

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
302 Engine rebuild materials? Tincan18 Windsor Power 5 04-25-2004 02:41 AM
Check out these times and tell me how i can get better! 1jimmy__d Stang Stories 6 06-24-2003 01:07 PM
HowTo: Get good times on street tires Sonics2042 Windsor Power 17 02-14-2002 06:24 PM
New Times (long) lx mike Stang Stories 2 12-02-2001 09:10 PM
Competition Engineering(Moroso) anti-sway bar opinion/pics....not good! 8850 Windsor Power 10 11-08-2001 11:47 AM


All times are GMT -5. The time now is 08:07 AM.


SEARCH