MustangWorks.com - The Ford Mustang Power Source!

Go Back   MustangWorks.com : Ford Forums > Mustang & Ford Tech > Windsor Power
Register FAQ Members List Calendar Mark Forums Read

Notices


Reply
 
Thread Tools Rating: Thread Rating: 1 votes, 5.00 average. Display Modes
Old 07-06-2002, 05:07 PM   #1
PKRWUD
Junior Member
 
PKRWUD's Avatar
 
Join Date: Mar 1999
Location: Ventura, California
Posts: 8,981
Default

Okay, good news/bad news.

The good news is that you don't have a blown head gasket. In fact, your test results were very respectable. Your engine has even wear, and is doing nicely.

The bad news is that you need more test equipment. Specifically, you need a fuel pressure tester, a cooling system pressure tester, and a vacuum gauge. The fuel pressure tester is comparably priced to the compression tester, and the vacuum gauge should be no more than $15. You should have your cooling system pressure tested, too, but those kits are usually $75 or more. Down here, there are auto parts stores (Kragen, for one), that will loan you tools for a small, refundable deposit. I would recommend borrowing a cooling system tester, and purchasing a fuel pressure tester and a vacuum gauge.

The fuel pressure tester will tell you if you have a leaking injector, and the cooling system pressure tester will tell you if you have a leak in the cooling system, and possibly where it is. The vacuum gauge will tell you MANY things, and is, in my opinion, the single best diagnostic tool you can ever have.

Let me know what you decide, and what you would like to do, and I will walk you through it.

Take care,
-Chris
__________________
Webmaster:
Rice Haters Club
Jim Porter Racing
Peckerwoods Pit Stop


Support Your Local
RED & WHITE!
PKRWUD is offline   Reply With Quote
Reply


Thread Tools
Display Modes Rate This Thread
Rate This Thread:

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Looking to buy and I need Advice...Fuel Pressure Test Gage and Compression Test Gage MTU 50 Windsor Power 3 10-18-2002 05:34 PM
C&L Mass air question and compression results & question. Agent_4573 Windsor Power 7 07-28-2002 07:10 PM
PKRWUD: Fuel Pressue Test Results ?? 95mustanggt Windsor Power 8 07-17-2002 01:11 AM
Cold compression test? 92Rustang Windsor Power 3 12-17-2001 09:47 PM
Leak down test results. chris91LX Windsor Power 1 12-14-2001 02:16 PM


All times are GMT -5. The time now is 07:45 AM.


SEARCH