Can ya help a new guy out???

clearwaterms · 05-25-2001, 11:15 AM

welcome to the world of mustangs...

you were looking at the K&N and pullies, that's a great start. Also the Bassaini (forgive the spelling) X pipe with a set of mufflers (your choice for sound: although im only like 25~30 minute's from your house, you can hear what my buddies 93 GT with no cats and MAC muffler's sounds like. Next I would spend the money on a gear 3.73 should be fine, 4.10's better. A torque converter, and a shift kit (these last two will give you more seat of the pants feel than anything your talking about bolting on.) A good place to check out when your ready to buy is Street Stuff in Addison @ 630-832-3773. Ask for Grant.

You have to remember things Subframes (put these on first) a rear suspension system (upper and lower control arms) a good tune up with new plugs, wires, and a new cap-n-rotor, fuel filter.

Thread Tools
Show Printable Version Email this Page
Display Modes	Rate This Thread
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode	Rate This Thread:

05-25-2001, 11:15 AM	#12
clearwaterms Registered Member Join Date: Jun 1999 Location: Westchester, IL, USA Posts: 171	welcome to the world of mustangs... you were looking at the K&N and pullies, that's a great start. Also the Bassaini (forgive the spelling) X pipe with a set of mufflers (your choice for sound: although im only like 25~30 minute's from your house, you can hear what my buddies 93 GT with no cats and MAC muffler's sounds like. Next I would spend the money on a gear 3.73 should be fine, 4.10's better. A torque converter, and a shift kit (these last two will give you more seat of the pants feel than anything your talking about bolting on.) A good place to check out when your ready to buy is Street Stuff in Addison @ 630-832-3773. Ask for Grant. You have to remember things Subframes (put these on first) a rear suspension system (upper and lower control arms) a good tune up with new plugs, wires, and a new cap-n-rotor, fuel filter.