MustangWorks.com - The Ford Mustang Power Source!

Go Back   MustangWorks.com : Ford Forums > Mustang & Ford Tech > Windsor Power
Register FAQ Members List Calendar Mark Forums Read

Notices


Reply
 
Thread Tools Rate Thread Display Modes
Old 08-09-2002, 02:59 AM   #1
zepherman
Registered Member
 
zepherman's Avatar
 
Join Date: May 2001
Location: Oklahoma City OK USA
Posts: 236
Default

ok, lt me try to expain it. The motor draws in air when one of the pistons in your motor starts its intake stroke the piston moves dowm in the bore and creates space in the cylinder that is filled with air. The force that makes the air fill the cylinder is atmospheric pressure. at the end of the intake stroke the intake valve shuts and traps the air in the cylinder. then the piston starts back up the cylinder on the compression stroke. at the end of the compression stroke all of the air i the cylinder has been compressed to around 9 times the atmospheric pressure(in a 9:1 compression motor). when the spark ignites the air/fuel mixture that is compressed in the top of the cylinder the piston is forced down by the explosion, which is what drives the motor. Now, if the compression stroke of the motor compresses all the air thats in the cylinder to a pressure 9 times what it was before, what if the air in the cylinder is already at a pressure many times greater than the atmospheric pressure when the compression stroke starts. Ill tell you what, you get a bigger boom on the power stroke. thats what a turbo/supercharger does, it makes the air pressure in the cylinder many times greater than it would normally be at the beginning of the compression stroke. you cant just make it easier for the motor to draw in air, you actually have to compress air into the cylinder before you will get any results. you simply cant put enoug air into a tank to do that.
__________________
90 GT 25th Anni. Did the AOD to T-5 swap, SPEC clutch, Steeda Tri-Ax shifter, BBK 2½ inch off-road H pipe, Flows, BBK 70mm TB/EGR, Ford Racing aluminim driveshaft, 3.55's, welded subframes, Ram Air, 3 core radiator, NOS dry kit 75 shot, and a K&N filter.

12.9 @ 108
zepherman is offline   Reply With Quote
Reply


Thread Tools
Display Modes Rate This Thread
Rate This Thread:

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Safety Issue 64 - 70 Mustangs Mach1 Cobra Jet Classic Mustangs 20 07-11-2005 08:06 PM
Pressure build up in Gas Tank Fuglee Windsor Power 1 08-21-2003 02:22 PM
Well, if the Air Tank as turbo didnt work out, how about this. zepherman Windsor Power 12 08-17-2002 02:22 PM
Ran a turbo Integra, a Grand National, and two bikes!!! WhiteT78Supra Stang Stories 23 07-19-2002 07:21 AM
Fuel Tank Question RMARIANI Windsor Power 3 10-15-2001 03:29 PM


All times are GMT -5. The time now is 06:06 PM.


SEARCH