Hybrid Mode
© Copyright 1995 thru 2008 - The Mustang Works™. All Rights Reserved.
MustangWorks.com is designed and hosted by Aero3 Media.
MustangWorks.com is designed and hosted by Aero3 Media.
|
|
09-19-2002, 09:26 PM
|
#1 |
|
Registered Member
Join Date: May 2001
Location: calgary alberta canada
Posts: 366
|
Being a body guy, I run into this every now and again. Trust me, it sucks, even if you done a few. Just a few questions, Does the out side door handel "feel" like its attached to any thing or does it flop around? What about the inside? Sometimes the rods get bent up and jam up the works. Is it unlocking? Not what you want to hear, but the trim panel sometimes just has to come off. Work around the seat and pry at it. You might wreck it. Hopefully you can go to a wrecker and get one cheap if you do. Have fun.
__________________
93LXcopcarSOLD14.3@96 @ 4500ft 2.02 60ft on street tires. my 67 ranchero NOT A 390 ANY MORE! 460! 3.70's cast manifolds, comp cams 262H, performer, 750DP 100K out of 79 F250 NEW(oct20/02)14.58@95mph 2.3 60 ft corrects to:13.86@100 66 merc comet351w, isky roller 600 lift 268/260@.050, vic jr. 700DP, 5000stall, 4.56's c-4, 3400lbs with driver 12.3@110 @ 4000ft 1.69 60 ft corrects to:11.69@115 |
|
|
 |
| Thread Tools | |
| Display Modes | Rate This Thread |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Putnam Park Open track Oct. 23rd & 24th | indiana dave | Corner Carvers Delight | 0 | 07-23-2004 08:22 PM |
| Door wont open | Scrapla | Windsor Power | 4 | 08-18-2003 11:41 AM |
| posi or open?? | 66StangGuy | Classic Mustangs | 7 | 05-25-2002 11:27 PM |
| Passenger door wont open | jason347lx | Windsor Power | 3 | 01-23-2002 09:44 PM |
| carb sticks wide open on '67 289 2V | DADS67 | Classic Mustangs | 3 | 10-24-1999 11:48 PM |