Pulling codes - Please help!!!!!!

Rick 91GT · 05-29-2001, 07:21 AM

Kevin- It's sounds like you are on the right track. What do your plugs look like? If it's pig rich like you describe they should be black, check them after a quick trip at WOT and that will tell you if they are rich or lean.

Since I got my car running good all the issues I blamed on the C&L are gone, smooth idle, well as smooth as it gets with the cam I have. I'm going to have my friends frend powder coat it, it does tend to soak the heat up from the headers though.

I took a ride in Mondo's car last night, whew man what 750HP+ will do for ya, it saw about 23psi of boost and we were gone, I had to take him for a ride in mine to show him what a real car felt like

.

------------------
Check Out My Site 91GT,Holley SysteMAX II Kit-Heads 2.02" x 1.60" port matched to a 1262,Anderson N-61,24#,76mm C&L,Full MAC exhaust 1-5/8" Long tubes,2-1/2" O.R H-Pipe,2 1/2" cat back, No A/C or PS or emissions, 12" K&N Filter,RNH PERFORMANCE Ram Air,Ron Davis Radiator,Full Suspension,S&W 8pt "X" brace,JAZ seats,3:73's,Welds..etc,4:30's and 31 splines coming very soon!

Thread Tools
Show Printable Version Email this Page
Display Modes	Rate This Thread
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode	Rate This Thread:

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
KOEO & continuous memory codes??	Simi Stang	Windsor Power	4	12-16-2003 02:37 PM
Need help pulling codes!	Stang_ROTY	Windsor Power	17	07-08-2003 08:12 AM
Pulling Codes?	Nixon1	Windsor Power	16	02-08-2003 08:02 PM
pulling codes	87 GT MUSTANG	Windsor Power	1	01-12-2003 11:42 AM
Need Help pulling codes on 96 F-150 5.0L...	Rick 91GT	Windsor Power	5	09-25-2002 05:50 PM

05-29-2001, 07:21 AM	#6
Rick 91GT Procharged! Join Date: May 1999 Location: Hanover, PA Posts: 1,539	Kevin- It's sounds like you are on the right track. What do your plugs look like? If it's pig rich like you describe they should be black, check them after a quick trip at WOT and that will tell you if they are rich or lean. Since I got my car running good all the issues I blamed on the C&L are gone, smooth idle, well as smooth as it gets with the cam I have. I'm going to have my friends frend powder coat it, it does tend to soak the heat up from the headers though. I took a ride in Mondo's car last night, whew man what 750HP+ will do for ya, it saw about 23psi of boost and we were gone, I had to take him for a ride in mine to show him what a real car felt like . ------------------ Check Out My Site 91GT,Holley SysteMAX II Kit-Heads 2.02" x 1.60" port matched to a 1262,Anderson N-61,24#,76mm C&L,Full MAC exhaust 1-5/8" Long tubes,2-1/2" O.R H-Pipe,2 1/2" cat back, No A/C or PS or emissions, 12" K&N Filter,RNH PERFORMANCE Ram Air,Ron Davis Radiator,Full Suspension,S&W 8pt "X" brace,JAZ seats,3:73's,Welds..etc,4:30's and 31 splines coming very soon!