

© Copyright 1995 thru 2008 - The Mustang Works™. All Rights Reserved.
MustangWorks.com is designed and hosted by Aero3 Media.
MustangWorks.com is designed and hosted by Aero3 Media.
![]() |
#5 |
Registered Member
Join Date: Aug 2002
Location: SanAntonio, Tx
Posts: 957
|
![]() I just replaced my clutch without resurfacing the flywheel, i can totally understand the wear pattern thing, but my pilot bearing was fine also, with a swap back to my original clutch cable, im getting real smooth clutch engagement, if i ride the clutch out from a stop i notice it shudder just a tiny bit, nothing major, i went to the track wednsday dropping the clutch at 4k and smelling clutch on the top end, im breaking it in right now
![]()
__________________
X-Texas highway patrol ssp 1990 coupe - exploder Gt-40 iron heads, Explorer intake, 19 lber's. E-cam. crane 1.7 rollers. 190fp. 75mm maf. 65mm tb, tubular subframe connectors, mac cai, Asp crank pulley, T-5, king cobra clutch, flowtech 1-5/8 unequals, mac X-pipe Frpp driveshaft, lakewood Lca's. race weight 3,160 12.69 @ 107.35, 1.71 60' 26x8.5 drag's 3.90 gear 13.20 @ 106.91 - 235/60/15 firestones 2.3 60' 3.27 gear |
![]() |
![]() |
Thread Tools | |
Display Modes | Rate This Thread |
|
|
![]() |
||||
Thread | Thread Starter | Forum | Replies | Last Post |
Subframe connectors, full length vs. standard | flyin 5.8 | Windsor Power | 2 | 10-01-2002 09:41 AM |
Full length or shorties? | Nicodemus | Small Ponies | 5 | 08-04-2002 10:55 AM |
MR2 took off from the line...then came to a complete stop! | what_import | Stang Stories | 6 | 05-31-2001 04:39 PM |
full length or standard length subframe connectors? | 84stangLX | Windsor Power | 4 | 04-23-2001 03:48 PM |