

© Copyright 1995 thru 2008 - The Mustang Works™. All Rights Reserved.
MustangWorks.com is designed and hosted by Aero3 Media.
MustangWorks.com is designed and hosted by Aero3 Media.
![]() |
#4 |
I'd rather be basketweaving
Join Date: Feb 2000
Location: Indianapolis
Posts: 2,551
|
![]() well I was figuring it would probably be a flywheel hp gain, but even at that, I would have seen atleast 75-80 at the wheels. I put a gage on it today, which was about the same temp outside, so the pressure would be close to the same it was yesterday. The pressure was about 850psi, which would explain a small loss in power, but would it explain a whole 20hp difference?
I did a search over on the corral and found a guy with a similar combo to mine, with the same NOS 5115 kit as I have. But he had the 75hp jets in. His NA numbers were almost the same as mine, and he actually made more power on the 75shot than I did with the "100" shot. He went from 240hp/286ft lb to 314hp/386ft lb. heres a link to that thread http://www.corral.net/forums/showthr...t=nitrous+dyno Bottle heater is next on my list for sure
__________________
NMRA O/C 9516 NA pumpgas stickshift 347 10.65@125.6, 6.73@100, 1.41 60ft |
![]() |
![]() |
Thread Tools | |
Display Modes | Rate This Thread |
|
|
![]() |
||||
Thread | Thread Starter | Forum | Replies | Last Post |
331 Dyno results | 302 LX Eric | Windsor Power | 12 | 04-29-2004 10:13 PM |
Dyno results | 7up | Windsor Power | 3 | 08-12-2002 01:24 AM |
you will NOT believe this... dyno results | fiveohpatrol | Windsor Power | 27 | 11-27-2001 02:53 PM |
Dyno results inside with timing adjuster installed | Mustang92 | Modular Madness | 7 | 02-20-2001 09:24 PM |