

© Copyright 1995 thru 2008 - The Mustang Works™. All Rights Reserved.
MustangWorks.com is designed and hosted by Aero3 Media.
MustangWorks.com is designed and hosted by Aero3 Media.
|
|
Thread Tools | Rate Thread | Display Modes |
![]() |
#7 |
Registered Member
Join Date: Oct 1998
Location: Pitts. Pa. USA
Posts: 61
|
![]() I am running 351W in 87 Lx with 750 holley. Find an intank pump from an 86 5.0 as it was carb. See if will run enough pressure, right at 7.5 is what you want. Mine would not so I added a holley blue pump mounted where the old fuel filter was. With the regular mounted up front, I can tune it to 7.5 lbs easily. Also using barry grant braded fuel lines and fittings from the regular to the carb.
Good Luck |
![]() |
![]() |
Thread Tools | |
Display Modes | Rate This Thread |
|
|
![]() |
||||
Thread | Thread Starter | Forum | Replies | Last Post |
What is the proper way to empty the gas tank and check a external fuel pump? | Stang_ROTY | Windsor Power | 1 | 07-23-2001 12:10 PM |
do i really need a high pressure oil pump? | LX XLR8R | Windsor Power | 7 | 07-19-2001 09:20 AM |
Is 47 For Fuel Pressure to high | pete1 | Windsor Power | 12 | 05-30-2001 03:39 PM |
What is the PN on a Walbro 255lph in tank pump? | NOSstang89 | Windsor Power | 3 | 05-14-2001 01:37 AM |
Fuel pump and fuel pressure regulator upgrade, opinions? | chris91LX | Windsor Power | 3 | 02-26-2001 11:21 AM |