Heating Problems Gone!!

Smokedawg · 06-14-2001, 02:25 PM

As I already stated.."THE HEATING PROBLEM IS FIXED!"..I am not going to go switching my thermostat or radiator..I am still running my underdrive crank pulley which is all I care about in the pulleys. I will think about a hi-flow waterpump down the road but for now its fine.

jimberg--thats for all the info on the thermostat..I know how they work though

To sum it up it less words than you did:
Once my motor heats up to 160 degrees..The thermo opens up to cool it down.

I tried a 180 before but by the time my temp hit 180..My temp guage never would stop rising..

------------------
347 Stroker Motor: Balanced, Cobra Transmission, Extrude Ported and Polished Upper and ported Lower, GT40 Milled Ported and Polished Heads, B303 Cam, BBK 1 5/8 Headers, 30lb Bosch Injectors, Holley AFPR, March Underdrive Pulleys, Perma-Cool Fan, 3-Core Radiator, Accel Performance Coil, Accel 300+ Racing Wires, Ram Air, K&N Filter, 73mm Vortech MAF, 70mm TB, FlowMaster Exhaust w/BBK Offroad H-Pipe, Hurst Shifter, 3:55 Gears, Ram Clutch, Cross Drilled Rotors, AC del, rear seat del.

Thread Tools
Show Printable Version Email this Page
Display Modes	Rate This Thread
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode	Rate This Thread:

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
what if any problems with your Modular Model Gt/Cobra?	fixer	Modular Madness	18	04-03-2005 09:18 AM
Over heating & starting problems	ruquick	Windsor Power	17	08-01-2004 08:20 PM
HELP: Problems after Paxton Novi 1000 install	Meatman	Windsor Power	3	10-17-2002 06:03 PM
'65 - Pull Away Problems - Action Plan	geordie	Classic Mustangs	0	05-14-2002 01:43 PM
Heating Problems	Smokedawg	Windsor Power	6	04-06-2001 04:57 PM

06-14-2001, 02:25 PM	#5
Smokedawg Tires Fear Me... Join Date: Jan 2001 Posts: 867	As I already stated.."THE HEATING PROBLEM IS FIXED!"..I am not going to go switching my thermostat or radiator..I am still running my underdrive crank pulley which is all I care about in the pulleys. I will think about a hi-flow waterpump down the road but for now its fine. jimberg--thats for all the info on the thermostat..I know how they work though To sum it up it less words than you did: Once my motor heats up to 160 degrees..The thermo opens up to cool it down. I tried a 180 before but by the time my temp hit 180..My temp guage never would stop rising.. ------------------ 347 Stroker Motor: Balanced, Cobra Transmission, Extrude Ported and Polished Upper and ported Lower, GT40 Milled Ported and Polished Heads, B303 Cam, BBK 1 5/8 Headers, 30lb Bosch Injectors, Holley AFPR, March Underdrive Pulleys, Perma-Cool Fan, 3-Core Radiator, Accel Performance Coil, Accel 300+ Racing Wires, Ram Air, K&N Filter, 73mm Vortech MAF, 70mm TB, FlowMaster Exhaust w/BBK Offroad H-Pipe, Hurst Shifter, 3:55 Gears, Ram Clutch, Cross Drilled Rotors, AC del, rear seat del.