Hybrid Mode
© Copyright 1995 thru 2008 - The Mustang Works™. All Rights Reserved.
MustangWorks.com is designed and hosted by Aero3 Media.
MustangWorks.com is designed and hosted by Aero3 Media.
|
|
10-02-2002, 11:16 PM
|
#1 |
|
Registered Member
Join Date: May 2001
Location: calgary alberta canada
Posts: 366
|
I make 400HP, 400ft/lbs (dynoed) with my 351w. I use 70 ford castings, ported ext. big valve (1.94) but the intake port is stock, torker 2, 700 holley, cut trw popup pistons (10.6:1), stock rods and crank. The only thing fancy is the roller cam, which is way too big for this combo. I'm sure it would be faster with a much smaller one. It has .600 lift and 266@.050. It also had about 500 passes on it when I finnaly got it dynoed too. In short, I think 350HP would be very easy to get with out fancy (expensive) parts.
The c4 should work fine. The bell housing is the same for all 302/late 289.
__________________
93LXcopcarSOLD14.3@96 @ 4500ft 2.02 60ft on street tires. my 67 ranchero NOT A 390 ANY MORE! 460! 3.70's cast manifolds, comp cams 262H, performer, 750DP 100K out of 79 F250 NEW(oct20/02)14.58@95mph 2.3 60 ft corrects to:13.86@100 66 merc comet351w, isky roller 600 lift 268/260@.050, vic jr. 700DP, 5000stall, 4.56's c-4, 3400lbs with driver 12.3@110 @ 4000ft 1.69 60 ft corrects to:11.69@115 |
|
|
 |
| Thread Tools | |
| Display Modes | Rate This Thread |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| 351W questions | QuantumMotorsports | Windsor Power | 6 | 04-24-2003 02:37 PM |
| 351W EFI in a Fox? | Big-T | Windsor Power | 4 | 12-02-2002 09:43 AM |
| Supercharged 351W. SCAT Forged everything setup. Engine build. | Fox Body | Windsor Power | 7 | 10-24-2002 11:08 PM |
| 351W guys..what exhaust??? | LX XLR8R | Windsor Power | 2 | 09-18-2001 12:08 AM |
| Attn 351W guys | 1988gtconv | Windsor Power | 9 | 01-11-2001 10:37 PM |