ne1 have,seen,heard about stormin norman hoods?

Smokedawg · 06-14-2001, 03:37 PM

I really like the stormin' normin' hoods..Make sure you check the corners on the hood. 2 of my friends have ordered hoods from cervinis and both of there hoods were tore up from where they only put styrofoam on 3 of the 4 edges of the box..And when that box gets shoved around. That 4th corner got shoved in and bent down and broke that corner of the hood that didnt have any sytrofoam. But the paintshop fixed both of the hoods for free since they were painting them.

------------------
347 Stroker Motor: Balanced, Cobra Transmission, Extrude Ported and Polished Upper and ported Lower, GT40 Milled Ported and Polished Heads, B303 Cam, BBK 1 5/8 Headers, 30lb Bosch Injectors, Holley AFPR, March Underdrive Pulleys, Perma-Cool Fan, 3-Core Radiator, Accel Performance Coil, Accel 300+ Racing Wires, Ram Air, K&N Filter, 73mm Vortech MAF, 70mm TB, FlowMaster Exhaust w/BBK Offroad H-Pipe, Hurst Shifter, 3:55 Gears, Ram Clutch, Cross Drilled Rotors, AC del, rear seat del.

Thread Tools
Show Printable Version Email this Page
Display Modes	Rate This Thread
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode	Rate This Thread:

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
does MP Motorsports make good hoods?	90LxDroptop	Windsor Power	0	03-16-2002 05:04 PM
Cervinis Stormin Norman Hood	FivepointOH	Appearance & Detailing	1	10-16-2000 01:52 AM

06-14-2001, 03:37 PM	#1
Smokedawg Tires Fear Me... Join Date: Jan 2001 Posts: 867	I really like the stormin' normin' hoods..Make sure you check the corners on the hood. 2 of my friends have ordered hoods from cervinis and both of there hoods were tore up from where they only put styrofoam on 3 of the 4 edges of the box..And when that box gets shoved around. That 4th corner got shoved in and bent down and broke that corner of the hood that didnt have any sytrofoam. But the paintshop fixed both of the hoods for free since they were painting them. ------------------ 347 Stroker Motor: Balanced, Cobra Transmission, Extrude Ported and Polished Upper and ported Lower, GT40 Milled Ported and Polished Heads, B303 Cam, BBK 1 5/8 Headers, 30lb Bosch Injectors, Holley AFPR, March Underdrive Pulleys, Perma-Cool Fan, 3-Core Radiator, Accel Performance Coil, Accel 300+ Racing Wires, Ram Air, K&N Filter, 73mm Vortech MAF, 70mm TB, FlowMaster Exhaust w/BBK Offroad H-Pipe, Hurst Shifter, 3:55 Gears, Ram Clutch, Cross Drilled Rotors, AC del, rear seat del.