Threaded Mode
© Copyright 1995 thru 2008 - The Mustang Works™. All Rights Reserved.
MustangWorks.com is designed and hosted by Aero3 Media.
MustangWorks.com is designed and hosted by Aero3 Media.
|
|||||||
|
|
Thread Tools | Rate Thread | Display Modes |
06-21-2001, 03:26 AM
|
#2 |
|
Guest
Posts: n/a
|
The reverse rotation pump is for serpentine belt systems (because of the way the belt wraps around the water pump pulley), and i'm not sure of any physical differences. If you use a V-belt and pulleys you shouldn't have a problem. the serpentine belt rotates flat side against the pump whereas the V-belt is grooved side. If you use V-belts and a standard rotation pump you should be ok, and vice versa, but i don't know if a reverse rotation pump will work on an older cover. I think also that 302 covers and 351 covers are basically the same so you might be able to use your stock HO 302 cover on your '69 block if you want to use a reverse rotation pump and serpentine belt. Good luck, hope this helped.
------------------ '84 Mustang 5.0 LX My car |
|
| Thread Tools | |
| Display Modes | Rate This Thread |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| water pump and timing cover bolts | red89lx | Windsor Power | 2 | 09-29-2003 09:13 AM |
| standard rotation water pump | QuantumMotorsports | Windsor Power | 3 | 07-21-2003 10:55 AM |
| polished aluminum standard rotation water pump | dragstang86 | Windsor Power | 2 | 04-22-2003 07:24 AM |
| Can a 93 Reverse Rotation Water Pump work on a '69 351W?? | Stang_ROTY | Classic Mustangs | 2 | 08-04-2001 01:52 PM |
| Water pump supposed to be reverse rotation...Why is it blowing coolant out the spout? | Stang_ROTY | Windsor Power | 2 | 08-04-2001 11:12 AM |