Threaded Mode
© Copyright 1995 thru 2008 - The Mustang Works™. All Rights Reserved.
MustangWorks.com is designed and hosted by Aero3 Media.
MustangWorks.com is designed and hosted by Aero3 Media.
12-02-2002, 08:02 PM
|
#4 |
|
Registered Member
Join Date: Jun 2002
Posts: 7
|
93 Cobra specs
According to SVT Cobra Recognition Guide:
engine changes- cobra -235 hp@4800rpm - 280lbs/ft@4000rpm 5.0GT -205 hp@4200rpm - 275lbs/ft@3000rpm cobra -GT-40 heads, w/hardened exhaust valve seats inserts intake -1.84" exhaust -1.54" rockers-1.72:1 extruded aluminum more aggressive cam -special intake-65mm throttle body 70mm mass air meter 12% smaller crank & water pump pullies. 5.0GT -intake -1.78" exhaust -1.46" Rockers -stamped steel @ 1.59:1 ratio Transmissions cobra had phosphate coated gears & stronger bearings, revised shifter. Stronger clutch assembly w/ less pedal effort Wheels- Tires Cobra -17x7.5 cast aluminum/ P245/45ZR17 Goodyear Eagles 5.0Gt -16x7 cast aluminum/ P225/55ZR16 Firestone Firehawk SVX Suspension - front Cobra -front springs are the same. 28.5mm stabilizer bar 5.0 GT -33mm stabilizer bar rear- Cobra -160# constant rate springs- 21mm stabilizer bar 5.0 Gt -200/300# variable springs -30mm stabilizer bar Brakes Fronts are the same. Rears- Cobra -10.07" disc w/single piston calipers 5.0 Gt -9" drums These are the mechanical differences listed. If you want apperance difference I can list them also. At www.SVt v.2002 they have comparasion chart you can view between all years of SVTs. (No 5,0GTs or LXs). Hope this helps. |
|
|
| Thread Tools | |
| Display Modes | Rate This Thread |
|
|