Efi vs carb

[PKRWUD]

Originally posted by 86GT
PKRWUD, I'm curious, what heads and intake/carb are on the beautfiul piece of art work?

Thanks for the kind words! The heads aren't anything fancy. They're just '78 castings with some slightly larger valves put in, and a little massaging. The intake is an Edelbrock Performer RPM, with a 1" spacer, and the NOS nitrous plate. The carb is a good question. I build my own, and have buckets from which I grab the parts I need, so it's built from several different carbs. It is a 650 double pumper, and the body probably started life as a Holley 4777.

Here's a picture I took a couple weeks ago where you can see the manifold and 1" plate better:



Take care,
~Chris