Valve Springs for Trick Flow stage 2 cam

[Murdock]

Here are the spec's for the TFS Stage 2: (Use the valve spring TFS specifies at the bottom) You will need to flycut the pistons.

TFS-51402001

Valve Setting Intake: .000 in.
Valve Setting Exhaust: .000 in.
Advertised Duration (Degrees): 286 intake/294 exhaust
Duration at .050 in. Lift (Degrees): 224 intake/232 exhaust
Camshaft Lift: .339 in. intake/.352 in. exhaust
Valve Lift with 1.6 Rocker Arms: .542 in. intake/.563 in. exhaust
Lobe Separation (Degrees): 112
Intake Cam Timing at .050 in. Valve Lift:
Opens 5 degrees BTDC
Closes 39 degrees ABDC
Max lift: 107 degrees ATDC
Exhaust Cam Timing at .050 in. Valve Lift:
Opens 53 degrees BBDC
Closes 1 degrees BTDC
Max lift: 117 degrees BTDC
Firing Order: 1-3-7-2-6-5-4-8
Camshaft Notes: Fair idle, good midrange power. Aftermarket intake, heads, headers, and modified Mass Airflow sensor required. 2,500-3,500 rpm stall converter or 5-speed with 3.55 in. or higher rear axle gear recommended. Best with 9.5:1-11:1 compression ratio.

Recommended Components: TFS-51402001
Valve Springs with 1.6 Rocker Arms: TFS-31400414
Valve Springs with 1.7 Rocker Arms: TFS-31400414