1 4cyl stang+$4,000- WHAT TO DO?

Smokedawg · 07-19-2001, 03:11 PM

Well..Lets see
Wonder how cheap u can get a 302 block for??

Bore and cleaning of block = $150
347 JE pistons = $500
Eagle 5.4 rods = $319
Crank = $300-800

You might be able to put together a 347. I know a place to order parts cheap. Let me know if you are interested.

If you plan on having big power, I would stay with about a 3:55 gear. Maybe a 3:73 if you can get good traction.
The sn95 seats will go right into your car too.

------------------
347 Stroker Motor: Balanced, Cobra Transmission, Extrude Ported and Polished Upper and ported Lower, GT40 Milled Ported and Polished Heads, B303 Cam, BBK 1 5/8 Headers, 30lb Bosch Injectors, Holley AFPR, March Underdrive Pulleys, Perma-Cool Fan, 3-Core Radiator, Accel Performance Coil, Accel 300+ Racing Wires, Ram Air, K&N Filter, 73mm Vortech MAF, 70mm TB, FlowMaster Exhaust w/BBK Offroad H-Pipe, Hurst Shifter, 3:55 Gears, Ram Clutch, Cross Drilled Rotors, AC and Smog del, rear seat del.

[This message has been edited by Smokedawg (edited 07-19-2001).]

[This message has been edited by Smokedawg (edited 07-19-2001).]

Thread Tools
Show Printable Version Email this Page
Display Modes	Rate This Thread
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode	Rate This Thread:

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Car Audio System in a 90 LX V8 stang convertible	ziggy_2k	Windsor Power	2	05-21-2002 12:33 AM
4cyl. T-5 transmission HELP	crazyhumpyd	Windsor Power	6	04-27-2002 10:08 PM
I Got A Stang!!	bobtodd	Blue Oval Lounge	7	04-04-2002 07:09 PM
SC parts to my 89 4cyl stang???	Strick	Small Ponies	2	06-08-1999 09:44 PM

07-19-2001, 03:11 PM	#2
Smokedawg Tires Fear Me... Join Date: Jan 2001 Posts: 867	Well..Lets see Wonder how cheap u can get a 302 block for?? Bore and cleaning of block = $150 347 JE pistons = $500 Eagle 5.4 rods = $319 Crank = $300-800 You might be able to put together a 347. I know a place to order parts cheap. Let me know if you are interested. If you plan on having big power, I would stay with about a 3:55 gear. Maybe a 3:73 if you can get good traction. The sn95 seats will go right into your car too. ------------------ 347 Stroker Motor: Balanced, Cobra Transmission, Extrude Ported and Polished Upper and ported Lower, GT40 Milled Ported and Polished Heads, B303 Cam, BBK 1 5/8 Headers, 30lb Bosch Injectors, Holley AFPR, March Underdrive Pulleys, Perma-Cool Fan, 3-Core Radiator, Accel Performance Coil, Accel 300+ Racing Wires, Ram Air, K&N Filter, 73mm Vortech MAF, 70mm TB, FlowMaster Exhaust w/BBK Offroad H-Pipe, Hurst Shifter, 3:55 Gears, Ram Clutch, Cross Drilled Rotors, AC and Smog del, rear seat del. [This message has been edited by Smokedawg (edited 07-19-2001).] [This message has been edited by Smokedawg (edited 07-19-2001).]