Desperately need help

[cad614]

Update

I pulled codes yesterday (4/24) and only got 111, everything passed. I checked the timing with a light as I tried to start it and timing is at ~10º BTDC. All wires are in the correct location.

Good news for today, the coil is bad. I took the TFI module in to have it checked to make sure I didn't get a bad one and figured I should have the coil checked at the same time. TFI was fine, coil wasn't. Looking back I remember the last time I tried using the old coil was before I replaced the TFI. So it looks like I was getting spark, just not good spark.

I'll try starting it up tomorrow after I check all my other connections to make sure everything's fine. I want to enjoy my Friday night by thinking I finally have this problem solved.

Thanks for the help guys.