Hybrid Mode
© Copyright 1995 thru 2008 - The Mustang Works™. All Rights Reserved.
MustangWorks.com is designed and hosted by Aero3 Media.
MustangWorks.com is designed and hosted by Aero3 Media.
|
|
04-30-2003, 11:54 PM
|
#1 |
|
Registered Member
Join Date: May 2001
Location: calgary alberta canada
Posts: 366
|
It's a classic problem. What happens is the ends never get into the bore, and they develope a varnish deposit on the bottom. The tuffest ones I had, I got with vise grips and a prybar. Don't reuse for any reason, new ones are cheap enough. Good luck!!
__________________
93LXcopcarSOLD14.3@96 @ 4500ft 2.02 60ft on street tires. my 67 ranchero NOT A 390 ANY MORE! 460! 3.70's cast manifolds, comp cams 262H, performer, 750DP 100K out of 79 F250 NEW(oct20/02)14.58@95mph 2.3 60 ft corrects to:13.86@100 66 merc comet351w, isky roller 600 lift 268/260@.050, vic jr. 700DP, 5000stall, 4.56's c-4, 3400lbs with driver 12.3@110 @ 4000ft 1.69 60 ft corrects to:11.69@115 |
|
|
 |
| Thread Tools | |
| Display Modes | Rate This Thread |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| What is a lifter? | SoulKeeper | Modular Madness | 7 | 05-09-2003 10:49 AM |
| Should I paint lifter galley? | 82 GT | Windsor Power | 35 | 04-29-2003 06:45 AM |
| Lifter help please... | Falcons Talon | Windsor Power | 11 | 09-11-2002 04:15 PM |
| Roller Lifter "oil hole" Q | drudis | Windsor Power | 11 | 03-05-2002 11:02 PM |
| Solid Lifter Cam? | clearwaterms | Windsor Power | 1 | 01-08-2001 02:53 PM |