How Fast

SmokinStangGT · 05-30-2003, 01:43 PM

Ok anyone have any ideas how fast my car will go in the quarter mile if i added some slicks and skinies to the setup in my signature?? E/T and MPH -Thanks

Roket · 05-30-2003, 02:25 PM

mid to low 13's

SmokinStangGT · 05-30-2003, 02:33 PM

What? really? before most of the mods i was running 14.013 and i had the stock tires, short throw shifter, X-pipe, flows, K & N cone, a superchip and a racing clutch and that is about it. I put so much more into this thing it should be lower than 13s, but maybe not, thanks for your opinion!

lx mike · 05-30-2003, 05:56 PM

What gear?? 12-1 compression??

i'd guess mid to high 12's at 103-105 mph.

SmokinStangGT · 05-30-2003, 07:08 PM

3:73 in the rear and yes 12:1 compression! each cylinder has 175 psi!

drtbiker · 05-30-2003, 07:43 PM

my car runs 13.2-13.4's all day long on nitto dr's with a 2500 rpm launch and 2.2-2.3 60fts... u probally on slicks and skinnies will go high 12's

later

Roket · 05-31-2003, 09:38 AM

OOOHHH...3.73 gear. I wasnt aware of that. Then i would have to say high 12's..especially with 12.1 compression.

05-30-2003, 01:43 PM	#1
SmokinStangGT Registered Member Join Date: Sep 2002 Location: IL Posts: 105	How Fast Ok anyone have any ideas how fast my car will go in the quarter mile if i added some slicks and skinies to the setup in my signature?? E/T and MPH -Thanks __________________ 89' GT with 5spd Hurst short throw, Keith Black 12:1 comp. pistons, Sealed Power drag racing rings, Fms F303 Cam, Ported and polished upper and lower intake with Ported E7TE heads that contain comp. cam double coiled springs with titainum locks and steel retainers, Fel-Pro Head Gaskets, 9mm ford racing wires, BBK chrome unequal shortys, Power Throttle bodies 70mm, Edlebrock 70mm EGR plate, 15inch K&N, Bassani X-pipe, Flowmaster 40 series, Eibach 1 1/2 lowering springs, Cobra R rims 17X9 with p235 on front and p275 on rear with Falken Zeix tires-RUNNING!

05-30-2003, 02:33 PM	#3
SmokinStangGT Registered Member Join Date: Sep 2002 Location: IL Posts: 105	What? really? before most of the mods i was running 14.013 and i had the stock tires, short throw shifter, X-pipe, flows, K & N cone, a superchip and a racing clutch and that is about it. I put so much more into this thing it should be lower than 13s, but maybe not, thanks for your opinion! __________________ 89' GT with 5spd Hurst short throw, Keith Black 12:1 comp. pistons, Sealed Power drag racing rings, Fms F303 Cam, Ported and polished upper and lower intake with Ported E7TE heads that contain comp. cam double coiled springs with titainum locks and steel retainers, Fel-Pro Head Gaskets, 9mm ford racing wires, BBK chrome unequal shortys, Power Throttle bodies 70mm, Edlebrock 70mm EGR plate, 15inch K&N, Bassani X-pipe, Flowmaster 40 series, Eibach 1 1/2 lowering springs, Cobra R rims 17X9 with p235 on front and p275 on rear with Falken Zeix tires-RUNNING!

05-30-2003, 05:56 PM	#4
lx mike Undescribable Join Date: Sep 1998 Location: Ft Myers Fla Posts: 1,539	What gear?? 12-1 compression?? i'd guess mid to high 12's at 103-105 mph. __________________ Rice Haters Club Member #101

05-30-2003, 07:08 PM	#5
SmokinStangGT Registered Member Join Date: Sep 2002 Location: IL Posts: 105	3:73 in the rear and yes 12:1 compression! each cylinder has 175 psi! __________________ 89' GT with 5spd Hurst short throw, Keith Black 12:1 comp. pistons, Sealed Power drag racing rings, Fms F303 Cam, Ported and polished upper and lower intake with Ported E7TE heads that contain comp. cam double coiled springs with titainum locks and steel retainers, Fel-Pro Head Gaskets, 9mm ford racing wires, BBK chrome unequal shortys, Power Throttle bodies 70mm, Edlebrock 70mm EGR plate, 15inch K&N, Bassani X-pipe, Flowmaster 40 series, Eibach 1 1/2 lowering springs, Cobra R rims 17X9 with p235 on front and p275 on rear with Falken Zeix tires-RUNNING!

05-30-2003, 07:43 PM	#6
drtbiker Registered Member Join Date: Jan 2002 Location: Mt. Prospect,IL Posts: 474	my car runs 13.2-13.4's all day long on nitto dr's with a 2500 rpm launch and 2.2-2.3 60fts... u probally on slicks and skinnies will go high 12's later __________________ 87-ford-mustang-SOLD! mods: 3:73's, off road h-pipe, b303 cam in gt- 40 motor w/ Power Plus intake, edelbrock 70mm tb & egr spacer, 72mm C&L, bbk long tubes, tremec tranny, centerforce dual friction clutch, upr and lwr CA's 255lph FP and soon more to come.... when i have money again SOME ADVICE Don't do burn outs in reverse it is very expensive New times with dead hook on dr's 13.27@103 with 2.0 60 foots w/100lb system Fastest time to date: 12.8@113

05-30-2003, 02:25 PM	#2
Roket Registered Member Join Date: May 2002 Location: Ottawa illinois Posts: 41	mid to low 13's

05-31-2003, 09:38 AM	#7
Roket Registered Member Join Date: May 2002 Location: Ottawa illinois Posts: 41	OOOHHH...3.73 gear. I wasnt aware of that. Then i would have to say high 12's..especially with 12.1 compression.

Thread Tools
Show Printable Version Email this Page
Display Modes	Rate This Thread
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode	Rate This Thread:

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
FAST vs. Chip	STEEDAJEFF	Windsor Power	1	09-29-2002 02:16 PM
new to fast mustangs but not fast cars...I've a few ?'s	XGN	Windsor Power	3	07-03-2002 09:40 AM
Are these fast??	Dark_5.0	Stang Stories	13	05-16-2002 01:19 PM
Super cars and Fast and the Furious	#1 Pony	Blue Oval Lounge	9	01-29-2002 12:54 AM
Pesky Supra, actually thought he had a fast car.	Unit 5302	Stang Stories	7	03-20-2001 01:34 PM