Need Serious Help

HP400RW · 05-30-2003, 10:30 PM

Today i was driving home from a friends house and when i was going about 20 25 mph my hood just flys wide open scaring the living **** out of me and doing some serious damage. i have a stormin normin 2.5in hood and the over hange smashed and put a big right through the cowl grille, the bars of the cowl under the grille and the two square parts on each side of the cowl in between the cowl grille and fender found on the 5.0 mine is a 89. i need to get a new one and first i was wondering if that peice is one or connected to the firewall, second if anyone is a body man can this be fixed and how much and third can i buy a brand new one anywhere and can you tell me where if you do.

Thanks to everyone who helps appreciated majorly
dan

LayanRubr · 05-31-2003, 03:59 AM

Ah man sorry, I had to reply, the same thing happend to my buddy with his 87 Gt

lovinspeed01 · 05-31-2003, 10:33 AM

I think the first question should be why the hood flew open. Do you use the stock latch or do you have hood pins. Because i know when I had the stock latch with a 3in fiberglass hood I had to shut it pretty hard.

Their is no point in fixing it or buying a new hood if its going to fly open again and break.

lovinspeed01 · 05-31-2003, 10:39 AM

And Second

Is the hole in the grill part underneath the cowl part of the hood, because if its is you could just cut it out and leave open. Alot of older fiberglass hoods didn't even come with that part.

Or are you taking about the cowl piece between the hood and the windshield, because if its that piece you could find one at a junk yard for a couple dollars.

HP400RW · 05-31-2003, 01:57 PM

the hood flew open cause some *** kid tried to open it and he didnt shut it right.

Hozer 88GTConv · 05-31-2003, 04:37 PM

Yes,
The metal can be easily straightened and can be made relatively plumb with sparing body filler.
Get Hood pins because w/ fiberglass hoods, even latched, can easily pop up.
I had to learn this the hard way, twice...

Good Luck...

HP400RW · 05-31-2003, 05:16 PM

Hozer.. ruffly how much will it cost??

Thanks

Hozer 88GTConv · 05-31-2003, 08:39 PM

$15 for a new plastic grill from junkyard, or $65 new from 50resto.com.

Did the metal work and filler myself, it would be about $200 at a decent shop.

Moroso hood pin kit for $28.

Enjoy...

HP400RW · 06-01-2003, 11:13 AM

thanks for all the help from everyone

05-30-2003, 10:30 PM	#1
HP400RW Registered Member Join Date: Jan 2003 Location: texas Posts: 46	Need Serious Help Today i was driving home from a friends house and when i was going about 20 25 mph my hood just flys wide open scaring the living **** out of me and doing some serious damage. i have a stormin normin 2.5in hood and the over hange smashed and put a big right through the cowl grille, the bars of the cowl under the grille and the two square parts on each side of the cowl in between the cowl grille and fender found on the 5.0 mine is a 89. i need to get a new one and first i was wondering if that peice is one or connected to the firewall, second if anyone is a body man can this be fixed and how much and third can i buy a brand new one anywhere and can you tell me where if you do. Thanks to everyone who helps appreciated majorly dan

05-31-2003, 03:59 AM	#2
LayanRubr Registered Member Join Date: Feb 2002 Location: Aggieland, Texas Posts: 297	Ah man sorry, I had to reply, the same thing happend to my buddy with his 87 Gt __________________ 87 Mustang 5.0 (308) Notchback - The Blue Baron Rice Hater's Club member #20

05-31-2003, 04:37 PM	#6
Hozer 88GTConv Registered Member Join Date: Feb 2002 Location: Jacksonville, FL Posts: 706	body repair Yes, The metal can be easily straightened and can be made relatively plumb with sparing body filler. Get Hood pins because w/ fiberglass hoods, even latched, can easily pop up. I had to learn this the hard way, twice... Good Luck... __________________ 1988 GT Convertible 331 10:1 TW heads, GT-40 intake, MSD, TRW flattops, B Cam w/ 1.7's, MAC exhaust, 24's, 70 TB, 76 MAF, 3.73's, Pro 5.0, Koni's, Anderson PMS, Wideband 02, yatta, yatta... One week with new motor, two speeding tickets...joy

05-31-2003, 08:39 PM	#8
Hozer 88GTConv Registered Member Join Date: Feb 2002 Location: Jacksonville, FL Posts: 706	cost... $15 for a new plastic grill from junkyard, or $65 new from 50resto.com. Did the metal work and filler myself, it would be about $200 at a decent shop. Moroso hood pin kit for $28. Enjoy... __________________ 1988 GT Convertible 331 10:1 TW heads, GT-40 intake, MSD, TRW flattops, B Cam w/ 1.7's, MAC exhaust, 24's, 70 TB, 76 MAF, 3.73's, Pro 5.0, Koni's, Anderson PMS, Wideband 02, yatta, yatta... One week with new motor, two speeding tickets...joy

Thread Tools
Show Printable Version Email this Page
Display Modes	Rate This Thread
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode	Rate This Thread:

05-31-2003, 10:33 AM	#3
lovinspeed01 Registered Member Join Date: Apr 2003 Location: Alberta, Canada Posts: 46	I think the first question should be why the hood flew open. Do you use the stock latch or do you have hood pins. Because i know when I had the stock latch with a 3in fiberglass hood I had to shut it pretty hard. Their is no point in fixing it or buying a new hood if its going to fly open again and break.

05-31-2003, 10:39 AM	#4
lovinspeed01 Registered Member Join Date: Apr 2003 Location: Alberta, Canada Posts: 46	And Second Is the hole in the grill part underneath the cowl part of the hood, because if its is you could just cut it out and leave open. Alot of older fiberglass hoods didn't even come with that part. Or are you taking about the cowl piece between the hood and the windshield, because if its that piece you could find one at a junk yard for a couple dollars.

05-31-2003, 01:57 PM	#5
HP400RW Registered Member Join Date: Jan 2003 Location: texas Posts: 46	the hood flew open cause some *** kid tried to open it and he didnt shut it right.

05-31-2003, 05:16 PM	#7
HP400RW Registered Member Join Date: Jan 2003 Location: texas Posts: 46	Hozer.. ruffly how much will it cost?? Thanks

06-01-2003, 11:13 AM	#9
HP400RW Registered Member Join Date: Jan 2003 Location: texas Posts: 46	thanks for all the help from everyone

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Need some serious help!!!	pnguyen	Windsor Power	4	04-20-2003 07:47 PM
Serious problem after gear swap.......	1bad89lx	Windsor Power	2	03-11-2003 01:00 AM
Blowing off some SERIOUS automotive steam!!!	DRASTiK	Blue Oval Lounge	5	09-02-2002 11:25 PM
Serious Question! Senior Members Please!	95mustanggt	Windsor Power	8	07-06-2002 03:40 PM
Stuck throttle about to cause serious problems	stock89	Windsor Power	2	04-27-2002 12:15 PM