Threaded Mode
© Copyright 1995 thru 2008 - The Mustang Works™. All Rights Reserved.
MustangWorks.com is designed and hosted by Aero3 Media.
MustangWorks.com is designed and hosted by Aero3 Media.
06-27-2003, 09:50 PM
|
#2 |
|
Import Slayer
Join Date: May 1999
Posts: 2,241
|
If you're talking about the cam thrust plate bolts they are 1/4 x 20 and 5/8inches long.
I don't know if you know this or not but you can't just use any 1/4 x 20 bolts. They are grade 8 and have a special machined head. Don't forget to mount the thrust plate in the correct position unless you have the "idiot proof" type with the grooves on both sides.
__________________
'82 GT 351W (.060)Comp Cams 274* Extreme Energy cam, ported & polished heads w/ 1.94/1.60 valves 10.3:1 flat top pistons,stealth intake, Mallory dizzy,Holley 750dp carb, BBK shorties,Flowmaster exhaust,C-4 with 3700 stall converter, B&M pro shifter,8.8 rear, 4:10's, subframes, electric fan, powermaster alternator, 4 core radiator. |
|
|
| Thread Tools | |
| Display Modes | Rate This Thread |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| What's the biggest size AFR heads that one could bolt to a "stock" 302? | crazypete | Windsor Power | 11 | 06-18-2004 08:15 AM |
| Header to h-pipe bolt size? | squid | Windsor Power | 4 | 02-24-2003 07:08 PM |
| crankshaft pulley bolt size | stanger8172 | Windsor Power | 2 | 05-26-2002 01:34 AM |
| Header bolt size | swtstang | Windsor Power | 1 | 05-22-2001 07:03 PM |
| Head bolt size? help? | MAstang5O | Windsor Power | 1 | 02-07-2001 08:36 PM |